Separate names with a comma.
Some features disabled for guests. Register Today.
Hello Everyone, I'm new to the CNC world after recently building a Rat Rig Stronghold One (750x750). I've been learning/testing for a few weeks...
I got my interface set up today to run a job so that my laptop would not be tied up for 6 hours on the job. After some issues with the naming...
Whipped up a couple simple feet that can clip into the bottom your Interface for those of us that like using our Interface on the table, but just...
Using Blackbox V32 with the interface. I have been trying to set it up for hours now and still nothing. After following the setup instructions...
Hello all, I am new to cnc and openbuilds system and am currently building my cnc using the original blackbox motion controller. I am considering...
I have my lightburn and cnc setup such that functions correctly when lightburn is running the show, however when I export gcode from lightburn...
Hello! I have my high torque openbuilds stepper motor wired up like the diagram below. I just have x axis wired up for testing. I turned on the...
I got mayself a 10 year old stepcraft 420 CKV router and im currently trying to bring it back to life. Im using a MKS DLC 32 with 8825 steper...
I recently received my interface. After setting it up, updating the firmware, etc., the y button started flashing red and the machine started...
I've been having problems with the touch controls on the interface for my build. When I first got it it worked great but after a couple months the...
I recently bought the new X32 black box and after going through all the steps and updates finally got it to work with the Interface. My interface...
At the bottom of docs:interface:prepare-blackbox-v2.3-2.6 [OpenBuilds Documentation] there is a Next: link that goes to "This page does not exist...
Why a USB led (laptop logo) are green blink all time. While I do not connect USB cable to PC. Only Interface and Blackbox.
I want to make a new cable that connects the interface with the BlackBox. Two different Molex connectors are used. I am primarily interested in...
Is there a way to save the GRBL profile from the Interface? I see in the menu load and edit the GRBL profile. I have edited the profile and would...
I am using the OB BlackBox and Interface combination on my CNC router. I am wondering if there is a proper way to shut down the machine. Or is it...
Is there any potential to be able to push GCode to the Interface using WiFi in a future update?
When I plug my interface into the BB it goes through the setup process but fails on step 7/7 telling me to check the AUX1 connector. I have...
Trying to understand Calibration using interface and USB. Question is: after you calibrate axis, is that calibration stored in the Profile or is...
Hey all, I wondering how long of a cable I could use with Interface? I need about 40' for an installation, I can easily make the cable. I'm...