Separate names with a comma.
Some features disabled for guests. Register Today.
Hey, I create a new 3D model and I noticed differences in models between V-SLOT and C-BEAM profiles. The difference is small but applies to the...
Hey everyone. First of all I want to thank everyone for all the wisdom, advice, and inspiration I have found on this forum. I am wanting to...
Hi all, I built my 25"x25" Solsylva build a few years ago and I've been able to make some amazing projects with it. I use a Makita laminate...
Hello, I am currently building a custom C-beam machine which is very similar to the standard C-beam machine openbuild sells but features two rails...
Hi Folks I have been playing around with a small CAM program called Carbide Create, however I now feel I have outgrown it's capabilities. I have...
Hello there. I am planning to build a frame that are to lift a pallet with a weight of approx 70 kg vertically in a distance of 120 cm. I am...
Has anyone ever seen a C-Beam extrusion based on a larger profile, like 25mm or 40mm T-slot? This would be something like a 25x100 C-Beam or...
This is a modification of my first spindle mount designed for 60mm rail used on the OX CNC. On this bracket the holes are positioned to fit an...
I have gotten a bit confused here, a simple statement in the build documentation would really help everyone start on the same page. I am using...
Hi all, I am about to buy a diy CNC mill kit and in my search for a suitable kit have come across this site which indeed is very inspiring ;) ......
C-Beam and Standard V-slots do not have the same rail opening. I have searched for C-beam did not find anything matching my needs. Those are low...
Hey folks, I gutted a 40mm stainless square tube and sunk it into my X axis in the hopes of increasing rigidity on my Kyo Sphinx style machine. I...
Hey guys, I want to build my first CNC and the C-Beam seems quite interesting, but the x axis just isnt long enough for my needs. Would it be...
As titled, I am finally prepping to move over from my existing build (Ooznest Ox 1500 x 1000 double belted) to a C beam set up of 1000 x 1000...
I'm a computer modder and often find myself short of accuracy when creating my parts. I do everything by hand. So, it's a lot of filing, sanding...
I am about to do a major upgrade on my MMXL and will use it in its current form to machine parts for the upgrade. I wanted to make sure it was...
Still deciding which way to go for my C Beam Build (Workbee / Sphinx). Either will be 1000x1000 so the same question applies to both. Is there...
Getting ready to purchase a kit but I was wondering if anyone knows if the double wide gantry shown here: (C-Beam® Gantry Plate - Double Wide) can...
When putting together a lead screw C-Beam actuator, how much longer must the screw be than the actual aluminum extrusion. I assume the screw must...
Hi all, I recently started a project involving multiple CNC axes based on the C-Beam design. Today I finally managed to run the first tests and I...
