Welcome to Our Community

Some features disabled for guests. Register Today.

Intermediate Rod's Display Stand

  • Machine Type:
    OpenBuilds LEAD Machine
    Software:
    LightBurn, Fusion 360, Openbuilds Control
    Electronics:
    Other Controller
    Machine Time:
    2 hours
    Bit or Laser Size:
    1/4 inch Flat End Mill
    Feeds & Speeds:
    1800mm/min 3mm DOC
    Materials:
    Starboard HDPE Plastic and 1/2 inch Acrylic
    Render
    Render 4.jpeg
    So here's a display stand that I've been working on for about a week, its decked out with with speakers, a monitor, batteries, low voltage controllers, and chargers, and a bunch more. It's made out of a material that I've never used before called Starboard, or HDPE Marine board. Its very very machinable and really just a pleasure to work with. The stand has a pretty cool acrylic sign on the top that the LEDs shine through for a cool effect. I used the 40 watt laser to etch the 1/2 inch acrylic at only 9% power. The Starboard was broken down on the table saw and then machined on the LEAD CNC. Be Careful to wear a respirator, the Starboard will give you a sore throat... ask me how I know. lol


    Please follow me on Instagram for more cool stuff,
    @Jakeslabnc
    Render 4.jpeg

Share this Project

User Comments

To post comments and download files, simply sign up and become a member!
  1. Mark Carew
    Man this turned out fantastic @Jacob Tabor I wish we had one of these at the MakerFaire show :) Really pro job brother nice work :thumbsup:
      Jacob Tabor likes this.
    1. Jacob Tabor
      I can arranged that for you! Lol I wish I could have been there for the MakerFaire. We were just in Florida at Disney world Only missed you guys by a week.
      Jacob Tabor, Nov 13, 2019
      Mark Carew likes this.
    2. Mark Carew
      Aww man that would have been cool! It was such a great show , everyone there was super inviting and there was so much going on between the fair and the robot wars it was a crazy fun time.
      Mark Carew, Nov 14, 2019
  2. Matthew Bates
    Great project Jake!
      Jacob Tabor likes this.
    1. Jacob Tabor
      Thanks man!!! This was the first project that made me wish for a bigger cnc.
      Jacob Tabor, Nov 12, 2019
      Matthew Bates likes this.
  3. Giarc
    I love machining Starboard. It cuts like butter. For smaller projects I find it very cheap in the off-cut bin at TAP Plastics. This was a cool project.
      Jacob Tabor likes this.
    1. Jacob Tabor
      Yeah its like too easy to work with! Thanks!
      Jacob Tabor, Nov 11, 2019
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice