Welcome to Our Community

Some features disabled for guests. Register Today.

Beginner Dw611 Small Dust Boot

Rating:
5/5,
  • Software:
    SketchUCAM, GRBL-Panel
    Machine Time:
    all in, about 1 hr
    Bit or Laser Size:
    1/8" endmill, 1/2" 90 deg Vbit
    Feeds & Speeds:
    1000 mm/Min, 30000RPM (no real thought here, still experimenting)
    multipass at 1.6mm per pass. (probably can increase this)
    Materials:
    wood: 1/2" Baltic Birch, 1/4" Baltic Birch
    HW: Rockler 1/4" Cam Lever, 2.5" dust port, screws & washers
    Other: dust bristle strip, glue
    I think a dust boot is a good rite-of-passage for beginning CNC people. This is my second dust boot for the DW611. First one was similar to the others that clamp onto the router barrel (including the one sold in the OB Store). This was disappointing in multiple ways but the two biggest issues: it puts the vacuum hose quite a way from the router bit and it is big so it will hang over the the front of the spoil board and not (or poorly) collect dust in that situation. So, my requirements when I sat down to design this:
    • Small footprint
    • Vacuum hose opening close to the bit
    • Vacuum hose entering at 45 degrees to minimize hose stress
    • Fast on/off for tool changes
    In the last photo you can see the results of the first test. The work area was completely dust free with a tiny bit on the workpiece. Very happy with the results. My biggest concern, that the 1/4" BB wouldn't be strong enough, turned out to be groundless. Some small tweaks if I build another:
    • increase the length of the cam hole bracket by 5mm to allow better clearance of the spindle mount
    • pocket the base 1/2" piece for the vertical triangles to allow positive alignment when gluing.
    • bevel the inside of the dust port hole on the port mounting plate (reduce air resistance)
    • increase the multipass cut size to decrease machine time.

    I have plans to make this out of polycarbonate for better bit visibility though I'm not sure it will be all that good given the skirt. Just have to try it.

    Photos, in order:
    1. 3D view
    2. 12mm BB Parts - smaller one holds the skirt in place
    3. 6mm BB Parts - Risers, spindle collar and dust port mount
    4. Front Right view showing hose attachment
    5. Front Left view showing cam clamp
    6. Front View showing completed test run. Nothing was done other than move the Y forward to show the results.
    dust shoe v3.png dust shoe v3-1.png dust shoe v3-2.png IMG_20190823_201432.jpg IMG_20190823_201456.jpg IMG_20190823_203722.jpg
    dust shoe v3.png dust shoe v3-1.png dust shoe v3-2.png IMG_20190823_201432.jpg IMG_20190823_201456.jpg IMG_20190823_203722.jpg

Share this Project

User Comments

To post comments and download files, simply sign up and become a member!
  1. Mark Carew
    Thank you for sharing this Phil, it's going to look great in acrylic
      ivanj727 and Paul Stoller like this.
  2. Pat Deyo
    Is this project available for download?
  3. phil from seattle
    I could make it available - it's in sketchup and uses sketchucam to generate the G-Codes. Let me know if you want. I have since redone it in Polycarbonate. IMG_20200214_154926-cropped.jpg
      Mark Carew likes this.
  4. TomC
    where can I get this project?
  5. Alex McCormick
    Do you think I could have the files for this? Would be great thanks!
  6. phil from seattle
    OK, I have uploaded a zip file with the sketchup .skp file onto my breakout board github repository - phil-barrett/grblHAL-teensy-4.x, look for "dust shoe v4-published.zip". You will need to have sketchup installed along with sketchucam. You will need to understand how do 2 sided milling (reference holes and pins to allow proper registration when flipping to workpiece). It can be made out of acrylic or polycarbonate. I prefer polycarbonate because it doesn't craze over time.
  7. Tony Fleming
    I would like to have the files, so I can make it also myself. Can you upload what you have and what program did you use, some details...
    Thank you very much.
    Tony
  8. Tony Fleming
    Somehow the uploaded file with the files just appeared after my post. a BUG here?
    BUT Thank you very much!!!
    I'll try it this week.
  9. OmidRad
    Hi Guy
    How Can Download File?
    Tnx
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice