Welcome to Our Community

Some features disabled for guests. Register Today.

Asian Influence

Rating:
5/5,
  • Software:
    Vectric, Open Builds
    Machine Time:
    5 hrs
    Bit or Laser Size:
    1/8th and 1/4 Bullnose
    Feeds & Speeds:
    60/30
    Materials:
    Fir. An old 2 x 12 I found
    I had this old weathered board so I thought I would do this. Stay tuned. After finishing this I came up with an idea similar to an inlay technique so we will see if it works.
    Enjoy.

    I need a bigger bed size. I am just to limited. I hope I can buy parts and create a bigger bed size without having to buy a whole new machine.
    6127E77D-0B0F-458F-BEF8-798C0F6611A8.jpeg A3C1D3A3-1912-4164-841A-A9C8E5B15065.jpeg

Share this Project

User Comments

To post comments and download files, simply sign up and become a member!
  1. Mark Carew
    Randy, You have such a unique and cool technique with painting on the carving, love it man really nice work
    1. Randy
      Thank you. I never really know where a project will take me. I just happened to find a bunch of left over pearl powders in my cabinet and thought I would give it a try mixed with clear Poly.
      Randy, May 13, 2021
      Mark Carew likes this.
  2. Randy
  3. Randy
    Here is the final Product.
    Enjoy 3B03DA5C-4918-4F54-92CE-A117CA3C7F2E.jpeg

    Unfortunately the board split on the bottom but I was able to reinforce it. Oh well.
      Mike K and Mark Carew like this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice