Arduino Mega 2560 Enclosure - 3D Printable

I Thought i would share my 3D Printable Designs for : Arduino Mega 2560 Cases that i made for my CNC Router.

They are Designed so no supports are needed while printing.

Hope Some People find them Useful.

The First Design is a Standard Type Mega 2560 Case - The Other was Designed to be mounted with Bolts or Screws in a CNC Controller's Enclosure thats Running GRBL Firmware.

Both Boxes have the option of fitting a Printed Reset Button, You May find the Reset button sticks down when you screw the case Base & Lid together. This Only Happens if your 3D Printer's Extrusion is a little bit over Extruding - But the fix is Very simple just Sand 0.2 mm off the bottom of the button

I Found on one of my printers it was perfect & on the Other Printer it was an issue - But that was the one that was over extruding

Both have been Printed Twice & Tested, I Use one in side my CNC Router Controller case.


Kind Regards - EXWHYZEE

[/IMG]

 

Hope you Find them Useful GrayUK

Please Note Both of the Case's are designed for people who Use Standard I/O Header Pins with Wires Soldered & Sleeved - They are not designed for Shields to be plugged in !

Kind Regards