Welcome to Our Community

Some features disabled for guests. Register Today.

eTrueUp Glide

Discussion in '3D printers' started by Elmo Clarity, Apr 14, 2017.

  1. Reanimator2k

    Builder

    Joined:
    Nov 26, 2016
    Messages:
    15
    Likes Received:
    0
    If publishing all of them is take too much of your time, than only a 20x40 Z mount for wheels, and 20x40 z mount for nylon inserts. I want to try to speed-up this build to 150-180mm/s, but on 100 it's already vibrating a lot. I have two spare 20x40 pieces for Z axis, want to try them because if i use 20x20 they play a lot when bed is moving.
     
  2. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    I don't have a drawing for nylon inserts. I am using lead screws.

    I am making some design changes that you might be interested in for getting the speed up. I am using a Nimble extruder, Piezo Probe, and Berd-Air for part cooling. I have reduced the weight of the carriage from 420g to 180g. That should allow for some faster printing.

    Here is a picture of the two carriages. The old one on the left used a Titan extruder.

    2017-08-03 19.19.31.jpg

    2017-08-08 05.19.14.jpg
     
    Keith Davis likes this.
  3. Keith Davis

    Keith Davis Veteran
    Builder

    Joined:
    Dec 11, 2013
    Messages:
    507
    Likes Received:
    398
    +Elmo do you have an STL for your Aero Titan extruder mount? I have a customer who wants to convert to that extruder.
     
  4. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    I should have. Just have to find it.
     
  5. Keith Davis

    Keith Davis Veteran
    Builder

    Joined:
    Dec 11, 2013
    Messages:
    507
    Likes Received:
    398
    LOL!! I know how that works :(
     
  6. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    I posted a note to you on your profile concerning the files.
     
  7. Alessandro Parisi

    Builder

    Joined:
    Nov 9, 2016
    Messages:
    10
    Likes Received:
    0
    Hello Keith,
    talking about the plate size and thickness versus weight (320x220mm plate, 6062 alluminium, specific wieght 2,7g/cm3):

    320x220x3mm = 570gr.
    320x220x5mm = 950gr.

    is it quite a thickness of 3mm or better 5mm, considering the traction force that is created between the two plates given by the adjusting springs? If 3mm, can the support plate bend ?

    I'm going to buy one from my hardware shop here in Italy...
     
  8. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    If I had of had access to a 5mm plate, I would have used it. The weight on the Y axis is not as critical as the X in this design. If you use a 6mm tool plate for the bed, that is where most of the weight will be.

     
  9. Alessandro Parisi

    Builder

    Joined:
    Nov 9, 2016
    Messages:
    10
    Likes Received:
    0
    Why the Y weight is not critical as the X axis? In my design I planned all the same movements and speed for X and Y axis..

    Anyway I planned to lighten it (the 5mm model) doing some holes, when the mount on the rails will be completed
     
  10. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    Probably worded that poorly. Weight is critical, but the extra weight between the 3mm and 5mm plate is very small compared to the weight of the tool plate.

     
    Alessandro Parisi likes this.
  11. Ariel Yahni

    Ariel Yahni OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Oct 22, 2015
    Messages:
    144
    Likes Received:
    496
    I like this build and have plenty of parts available to make it. Are you sharing the files?
     
  12. Elmo Clarity

    Elmo Clarity Journeyman
    Builder

    Joined:
    Jan 17, 2015
    Messages:
    505
    Likes Received:
    149
    I am planning on it. I'll be starting a new build with the files. I have just recently completed the new build, but because it is not using the glide system, I didn't want to confuse things by using that name. Right now I have some family issues I need to take care of and hopefully I will get the files posted here by the end of the month.
     
    Ariel Yahni likes this.
  13. Keith Davis

    Keith Davis Veteran
    Builder

    Joined:
    Dec 11, 2013
    Messages:
    507
    Likes Received:
    398
    I had a custromer ask me to redesign his TrueUp Glide for 20x40 Z upright using v-wheels. Here's what we came up with. The SKP is the entire thing assembled.

    [​IMG]
    [​IMG]

    ASSEMBLED SKP ZIP
     
  14. Aravoth

    Aravoth New
    Builder

    Joined:
    Jan 11, 2014
    Messages:
    4
    Likes Received:
    1
    Keith or Elmo, do either of you sell just the printed parts? I'm interested in purchasing them.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice