Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

I pressed Pause on Openbuilds Control while milling...

Discussion in 'OpenBuilds Bug Report' started by Mightymike, Oct 12, 2020.

Tags:
  1. Mightymike

    Mightymike New
    Builder

    Joined:
    Sep 17, 2020
    Messages:
    13
    Likes Received:
    4
    Hello again,

    I pressed Pause while milling and after i resumed the spindle moved the cut 0.5cm to the left and continued the cut. is this a software error?

    i attached an image to see.

    thank you in advance.
     

    Attached Files:

    #1 Mightymike, Oct 12, 2020
  2. Rob Taylor

    Rob Taylor Master
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    1,470
    Likes Received:
    746
    Is it replicable? Probably hard to tell anything definitive without seeing the g-code around where it happened and a serial log of the period around the pause event.
     
    #2 Rob Taylor, Oct 12, 2020
    Peter Van Der Walt likes this.
  3. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,040
    Likes Received:
    4,123
    I pause quite often, so shouldn't be. But yeah, try replicating, get the exact pattern of events that causes a mishap
     
    #3 Peter Van Der Walt, Oct 12, 2020
  4. Mightymike

    Mightymike New
    Builder

    Joined:
    Sep 17, 2020
    Messages:
    13
    Likes Received:
    4
    ok i will try that and write here again.

    i have another problem tell me peter if i have to make a new thread to help others as well.

    The problem: in the same cut as before, when the spindle "dives" for the fist pass it is drilling off the designed area, creating like a tear.
    i will attach a photo.

    thank you again!
     

    Attached Files:

    #4 Mightymike, Oct 12, 2020
  5. Mightymike

    Mightymike New
    Builder

    Joined:
    Sep 17, 2020
    Messages:
    13
    Likes Received:
    4
    Sorry, but what do you mean by replicable? (i'm brand new in the CNC world..)
    and i forgot to copy the code... next time i will do that... thank you
     
    #5 Mightymike, Oct 12, 2020
  6. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,040
    Likes Received:
    4,123
    Also need the gcode. Always include the gcode files for analysis

    Replicate = reliably reproduce the same error (in case it was a once off mishap instead)
     
    #6 Peter Van Der Walt, Oct 12, 2020
  7. Mightymike

    Mightymike New
    Builder

    Joined:
    Sep 17, 2020
    Messages:
    13
    Likes Received:
    4
    Ok Peter. I will do that and post back.
    thank you again!

    another question... :D

    is it possible to turn on off the live position of the spindle? because after one update it doesnt show up.
     
    #7 Mightymike, Oct 12, 2020
  8. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    14,040
    Likes Received:
    4,123
    Troubleshooting tab > Application Diagnostics > Disable 3D Viewer Realtime Job Position Indicator should be what you are looking for

    upload_2020-10-12_20-47-17.png
     
    #8 Peter Van Der Walt, Oct 12, 2020
  9. Mightymike

    Mightymike New
    Builder

    Joined:
    Sep 17, 2020
    Messages:
    13
    Likes Received:
    4
    i cant believe i couldnt find it...

    thank you again.
     
    #9 Mightymike, Oct 12, 2020
    Peter Van Der Walt likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice