Welcome to Our Community

Some features disabled for guests. Register Today.

Barcelona Build

Discussion in 'CNC Mills/Routers' started by Neil Scott, Dec 3, 2019.

  1. Neil Scott

    Builder

    Joined:
    Nov 12, 2019
    Messages:
    55
    Likes Received:
    14
    Neil Scott published a new build:

    Read more about this build...
     
  2. sergeygygierm

    Builder

    Joined:
    Nov 5, 2019
    Messages:
    6
    Likes Received:
    0
    Здравствуйте, простите за беспокойство если ошибся веткой, на моем компьютере этот сайт с ошибкой открывается наверное у меня программа глючит не могу найти причину, у меня у одного так или у всех?
     
  3. Neil Scott

    Builder

    Joined:
    Nov 12, 2019
    Messages:
    55
    Likes Received:
    14
    Barcelona Build

    Спасибо за ваши Коментарии. Ссылка ниже. На данный момент есть только титульная страница и один комментарий от меня, в котором говорится, что я заказал детали 3 декабря. У моего сына день рождения, он инженер-ядерщик. Набор должен быть доставлен мне на следующей неделе, и я начну собирать его на Рождество, когда у меня будет больше времени. Мне нужно заказать больше деталей для электроники, и они придут из Англии. Пожалуйста, продолжайте проверять, чтобы увидеть развитие. Очень взволнован. Счастливого Рождества Матери России! Спасибо Нил .
     
  4. sergeygygierm

    Builder

    Joined:
    Nov 5, 2019
    Messages:
    6
    Likes Received:
    0
    Доброго времени суток, простите за беспокойство если темой ошибся, у меня на компе открытие сайта происходит с ошибкой наверное у меня программа глючит в чем проблема не могу понять, такая фигня только у меня?
     
  5. Neil Scott

    Builder

    Joined:
    Nov 12, 2019
    Messages:
    55
    Likes Received:
    14
    Barcelona Build


    Когда я нажимаю на ссылку выше, открывается сборка. Я попробовал это для другого компьютера, и это работает. Вы зарегистрировались на форуме, так как это может вас заблокировать? Если вы зарегистрированы и не можете получить доступ снова, пожалуйста, дайте мне знать, и я проверим все настройки на сайте и свяжусь с сотрудниками службы поддержки. Спасибо. С уважением Нил
     
  6. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Hi Neil what bundle did you go with. All the best with your build! Thanks for sharing :thumbsup:
     
  7. Neil Scott

    Builder

    Joined:
    Nov 12, 2019
    Messages:
    55
    Likes Received:
    14
    I went for a 1075 lead screw from Makersupplies in Denmark in the end, I was thinking of a belt system but in view of the investment I wanted something thats going to last and not cause me any problems.

    I'm not sure where you are based but im in europe and I was put off purchasing from the other supplier in europe as there was a lot of negative comments about them and now that the UK is out of europe I didn't want any problems with customs from Ooznest , they are very good but no longer based in europe and I'm in Spain.

    What I didn't want was the bed moving around as I have a small cnc that does that ands to be honest I feel that its just more maintenance all the time to keep it square etc.

    Looking to build over the Christmas break, still need a few small things but the bulk of the kit is here, the gantry and electronics, just the final rail chains and avionics plugs and a electrical cabinet to sort out, most of those I am getting local.

    Many thanks, Im very happy with my purchase.
     
  8. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    That's great to hear Neil your almost there.Looking forward to checking out your projects.
    OpenBuilds is a US based company with distributors worldwide and and thanks to community support is growing like crazy!
    Glad to hear Maker supplies took care of you, you'll be up and running in no time. :thumbsup:
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice