Separate names with a comma.
Some features disabled for guests. Register Today.
Hello, I am new to all of this so bare with me. Context: I am building a custom machine using the C beam XY gantry in conjunction with a 2x72...
What operates Relay-1 using the Openbuilds Controller Blackbox X32? I know M3/M4 operate Relay-2 and M8/M9 operate the coolant. Is there...
I use Fusion, which always adds Gcode at the end of the final operation that sends the Holder to the Home position. I want to eliminate that...
For starters, I installed the latest OpenbuildsFusion360PostGrbl.cps post-processor in fusion 360 and have the latest firmware in my interface...
Hi All, My first build, so am pretty inexperienced. I have just tried sending my first GCode to my machine, but within a few commands the job...
Hi and thank for your help. I had my own XYZ probe machined. I used it a couple of times as Z-probe only and I manged to do the custom setup. I...
Hello I have built a backstop for my brake press but I'm having problems creating G code program that I can then save for future jobs how do I...
I have my lightburn and cnc setup such that functions correctly when lightburn is running the show, however when I export gcode from lightburn...
Hi Everyone So previously I used Mach 3 and this was with a shopbot machine to run my files and cut my jobs and now that I've moved over to...
I just added a VFD and Spindle to my Lead1515, I have the Black Box motion Control system, It looks like I need to change the post processor...
I'm trying to run a file created for another post processor, but standard non-modal gcode. (see attached for the first few lines). I home (G28) my...
I just built a huge pen plotter using the Acro system. I really have zero idea what I am doing (on both the software and hardware side), and I...
After running a job where the origin was set with G92 to some other location offset from the home position, how can I move the machine to a...
Hey there, Last year I have build the Lead 1515 CNC. I use it with a plasma setup. (Hypertherm 45 xp) It works great, I am really happy with it....
Hi. Is there anyway of increasing the F command number other than manually? Doing some tests of my pen plotter (acro 1510 + OB Black Box). The...
Hi! I'm using the Blackbox controller and I want to trigger a solenoid at a quite high frequency, 4-8 times per second (as much as possible...
Hello, i have a custom build cnc which i bought from a local store. The problem i have is this: it is cutting most of the drawing correct, but in...
Hello Friends, I was wondering if anyone has found a way to check a log of movements from their Interface. I have been running some drill...
I'm pretty new to sketchup and cnc but I'm getting on with most things ok but keep hitting immovable barriers. Carefully following instructions...
I have been having an issue with my Workbee where, despite putting M3 and M5 into my Gcode, I need to start and stop my router before running my...