Here is the start of my build. I am hoping for lots of help with getting the design for a large laser cut table for cutting cloth. This is my first build and I will build a smaller table to get the electronics working and get a feel for how to do this. I will be posting updates hopefully weekly until I really get the project off the ground. Then more often as things really progress.
Any help would be great.
I am not that good with Sketch up but here are my thoughts so far.
Large Laser cut table build
Large 6 x 10 foot laser table build. New to building CNC
- Build License:
- CC - Attribution - CC BY
Reason for this BuildTo help cut out patterns
Inspired byFriend that has built a small table
Qty Part Name Part Link Comments 3 V-Slot linear Rail 20mmx80mmx1500mm http://openbuildspartstore.com/v-slot-linear-rail/ Link 8 T Joining Plate http://openbuildspartstore.com/t-joining-plate/ Link 3 Nema 23 Stepper Motor http://openbuildspartstore.com/nema-23-stepper-motor/ Link 6 Micro Limit Switch http://openbuildspartstore.com/micro-limit-switch/ Link 0 Link 1 GT3 Timing Belt Spool http://openbuildspartstore.com/gt3-timing-belt-spool/ Link 1 GT3 Aluminum Timing Pulley - 20 Tooth http://openbuildspartstore.com/gt3-aluminum-timing-pulley... Link 1 Timing Belt Tension Torsion Spring http://openbuildspartstore.com/timing-belt-tension-torsio... Link 1 12V/30A Power Supply http://openbuildspartstore.com/12v-30a-power-supply/ Link 1 CNC xPRO V2 Controller Stepper Driver http://openbuildspartstore.com/cnc-xpro-v2-controller-ste... Link