This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily put away when it's job is done.
This will BLDC motor as the spindle with a MCU co-processor to act as the speed controller. Built-in probe for leveling. And a nice big E-stop. The side panels will be cut out of HDPE (Maybe at a later date aluminum)
This unit is just under 13" wide and about 11" deep. And will handle 6x9" PCBs.
This is a work in progress. I have about 20% of the parts needed to start assembly.
Small Portable PCB CNC Machine (CoreXY)
Build in 'CNC ROUTER BUILDS' published by ymilord, Jun 24, 2015.
This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.
-
-
-
- Build Progress:
-
- Build in Progress...
Attached Files:
-
Special Notes
About 85% done with the CAD work. I'll soon price out the parts and slowly build it.
comtezero, arthit, John Piel and 1 other person like this. -
-
Build Author ymilord, Find all builds by ymilord
-
- Loading...
-
Build Details
- Build License:
-
- CC - Attribution NonCommercial - CC BY NC
Reason for this Build
I have a large CNC in the garage. I'd like to have something small that I can use in my office to quick proto's of PCBs.Inspired by
Based on the CoreXY platform.