Build List
-
Active Filters:
no
![Maximus 3D Printer](https://openbuilds.com/data/article_images/l/0/952.jpg?t=1406983407)
Build Author
mytechno3d
Views
64062
Maximus 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
![Standalone Torch Height Controller for CNC Plasma Cutting](https://openbuilds.com/data/article_images/l/9/9571.jpg?t=1601852808)
Build Author
Retsaj
Views
53418
Standalone Torch Height Controller for CNC Plasma Cutting
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
31572
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![OpenBuilds Enclosure Series](https://openbuilds.com/data/article_images/l/9/9535.jpg?t=1606859634)
Build Author
OpenBuilds
Views
25308
OpenBuilds Enclosure Series
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/314.jpg?t=1529428714)
Easy to build series of enclosures for all your CNC needs!
![DSLR Video Slider](https://openbuilds.com/data/article_images/l/0/535.jpg?t=1409501345)
Build Author
Rob Taylor
Views
24789
DSLR Video Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23710
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
![Simple Cnc System (arduino Grbl)](https://openbuilds.com/data/article_images/l/8/8474.jpg?t=1556544699)
Build Author
viktop
Views
21175
Simple Cnc System (arduino Grbl)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20212
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
19963
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18195
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile](https://openbuilds.com/data/article_images/l/2/2430.jpg?t=1439504766)
Build Author
zelos
Views
18023
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
Camera slider for stacking focus
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is just a small project to get use to the OpenBuild products.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16659
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
DIY anodizing power supply
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
How to make your own anodizing power supply on a budget
![Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)](https://openbuilds.com/data/article_images/l/8/8485.jpg?t=1567627790)
Build Author
viktop
Views
15939
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill.
Nox 1500mm x 1500mm C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm
![PiDuinoCNC Controller](https://openbuilds.com/data/article_images/l/3/3091.jpg?t=1456136696)
Build Author
David Arroyo
Views
13565
PiDuinoCNC Controller
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
blackcat3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......
![stranger than fiction OX](https://openbuilds.com/data/article_images/l/2/2100.jpg?t=1464827183)
Build Author
sw3Dp
Views
10880
stranger than fiction OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
OX hybrid all CAD open sourced non-commercial ip; .dwg, .dxf,.3dm, .iam, .ipt files jamming their pie
![Arduino Grbl Laser CNC](https://openbuilds.com/data/article_images/l/7/7170.jpg?t=1527625247)
Build Author
jpjoshua
Views
10740
Arduino Grbl Laser CNC
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered Laser CNC using GRBl firmware.
![SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer](https://openbuilds.com/data/article_images/l/4/4275.jpg?t=1483369813)
Build Author
Venturebit
Views
10550
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Filament winder ( carbon fiber )
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Carbon fiber filament winder
![+Laser](https://openbuilds.com/data/article_images/l/7/7097.jpg?t=1525413539)
Build Author
BNMaker
Views
9953
+Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
![OXBear](https://openbuilds.com/data/article_images/l/1/1056.jpg?t=1441332255)
Build Author
Bear
Views
9948
OXBear
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
![MULIMATERIAL 3D PRINTER (in progress)](https://openbuilds.com/data/article_images/l/3/3449.jpg?t=1463382525)
Build Author
Keteland
Views
9828
MULIMATERIAL 3D PRINTER (in progress)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9070
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
![1x1 Meter Laser Engraver](https://openbuilds.com/data/article_images/l/4/4584.jpg?t=1487243327)
Build Author
COMsulting
Views
8773
1x1 Meter Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Building of a big open frame laser engraver.
![K40 Cube Laser Cutter](https://openbuilds.com/data/article_images/l/7/7808.jpg?t=1542237519)
Build Author
pedrofernandez
Views
8687
K40 Cube Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The k40 cube is a laser cutter build using mostly stock parts of the chinese k40 laser
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8536
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![Upgrading Your 3D Printer With Synchronous Leveling](https://openbuilds.com/data/article_images/l/9/9159.jpg?t=1580588676)
Build Author
Keith Davis
Views
8468
Upgrading Your 3D Printer With Synchronous Leveling
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Upgrading printers for Synchronous Leveling
![3D Printer 320x220x200](https://openbuilds.com/data/article_images/l/2/2381.jpg?t=1437294682)
Build Author
openhardwarecoza
Views
8337
3D Printer 320x220x200
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me
![Zorkbot](https://openbuilds.com/data/article_images/l/2/2140.jpg?t=1431624364)
Build Author
Anglesachse
Views
8138
Zorkbot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Corexy, with possible head change (3d, cnc, laser)
![Sphinx XL/R7](https://openbuilds.com/data/article_images/l/5/5224.jpg?t=1497737989)
Build Author
Hisha
Views
7917
Sphinx XL/R7
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000mm x 1000mm Sphinx/R7 build.
Schematix OX metal build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX metal build from an noob
![My Belt & Pinion Drive CNC Router](https://openbuilds.com/data/article_images/l/2/2512.jpg?t=1440728708)
Build Author
Justin Butler
Views
7570
My Belt & Pinion Drive CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
![My C Beam - NEMA 17 - GRBL- Arduino project](https://openbuilds.com/data/article_images/l/5/5076.jpg?t=1503064485)
Build Author
Huub65
Views
7516
My C Beam - NEMA 17 - GRBL- Arduino project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
![C-Beam Evolution MkII](https://openbuilds.com/data/article_images/l/4/4419.jpg?t=1494575087)
Build Author
mikev
Views
7483
C-Beam Evolution MkII
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Robo Morten
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
![DIY Multi Row Nodal Point Spherical Panorama Head](https://openbuilds.com/data/article_images/l/4/4618.jpg?t=1487601004)
Build Author
Makerparts
Views
6803
DIY Multi Row Nodal Point Spherical Panorama Head
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
DIY Pano Head
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6699
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![3DS Cube 3 Modular Extruder](https://openbuilds.com/data/article_images/l/4/4734.jpg?t=1489943620)
Build Author
Tom Dirriwachter
Views
6404
3DS Cube 3 Modular Extruder
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
How to modularize the 3D Systems Cube 3 extruder nozzle.
The BEE and ME
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
HardKnot OX 4x4
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.
![147 RepStrap 002](https://openbuilds.com/data/article_images/l/5/5173.jpg?t=1496854232)
Build Author
Fabio Orsi
Views
5767
147 RepStrap 002
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.
![Small C-Beam Plate Maker With Remote Login & Operation](https://openbuilds.com/data/article_images/l/5/5443.jpg?t=1503117835)
Build Author
DaveStewart
Views
5136
Small C-Beam Plate Maker With Remote Login & Operation
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
![Workbee 1510 Screw Driven](https://openbuilds.com/data/article_images/l/8/8265.jpg?t=1549819113)
Build Author
msdosfx
Views
5127
Workbee 1510 Screw Driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee 1510 screw driven build by MsDosFX.
![Small PCB, Engraving and Delrin CNC Mill](https://openbuilds.com/data/article_images/l/6/6491.jpg?t=1518546520)
Build Author
JAC_101
Views
4899
Small PCB, Engraving and Delrin CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.
![Pong CNC](https://openbuilds.com/data/article_images/l/3/3425.jpg?t=1462357169)
Build Author
Gerrald
Views
4766
Pong CNC
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
![Hotwire cnc Surfboards](https://openbuilds.com/data/article_images/l/9/9769.jpg?t=1667476118)
Build Author
2SIsurf
Views
4681
Hotwire cnc Surfboards
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
![the Feedback Fractal project](https://openbuilds.com/data/article_images/l/8/8139.jpg?t=1546966147)
Build Author
Cortellini
Views
4626
the Feedback Fractal project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
![Arizona OpenBuilds MiniMill CNC](https://openbuilds.com/data/article_images/l/6/6092.jpg?t=1514846826)
Build Author
ZacharyB
Views
4564
Arizona OpenBuilds MiniMill CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
CNC Lathe Upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
So, not much here, as I'm still building, but I'm putting in the work.
![1500mmx500mm Kossel Delta](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
TouchPadKing
Views
4263
1500mmx500mm Kossel Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...
![Candler Customs - Custom CNC Machine](https://openbuilds.com/data/article_images/l/6/6234.jpg?t=1516136547)
Build Author
CandlerCustoms
Views
4079
Candler Customs - Custom CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
![Routy based build](https://openbuilds.com/data/article_images/l/5/5072.jpg?t=1495499282)
Build Author
Hisha
Views
4072
Routy based build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Routy based build using 1000mm Y axis beams and 500mm X axis beams. Using a 20x80 Z axis to use the OpenBuilds router mount.
![AluVault MINIMAX](https://openbuilds.com/data/article_images/l/0/900.jpg?t=1402486549)
Build Author
Leon Style
Views
4020
AluVault MINIMAX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Easy build cnc router with t slot profile and nylon machined part
![Home build from A to Z](https://openbuilds.com/data/article_images/l/10/10330.jpg?t=1658093508)
Build Author
tarekhassan2030
Views
3871
Home build from A to Z
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread
![snc98_Slash-Number-Calculator](https://openbuilds.com/data/article_images/l/5/5117.jpg?t=1495901212)
Build Author
Jens Grabner
Views
3464
snc98_Slash-Number-Calculator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
![Motorized mic stand](https://openbuilds.com/data/article_images/l/9/9755.jpg?t=1611514033)
Build Author
Sergei Starovoitov
Views
3313
Motorized mic stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This system allows you to adjust the position of the microphone remotely
Custom Ski and Snowboard CNC for a High School Woodwhop
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Custom size CNC to make custom skis and snowboards
![3DTwinX Gantry CNC System](https://openbuilds.com/data/article_images/l/10/10493.jpg?t=1700394651)
Build Author
CONUCON
Views
3150
3DTwinX Gantry CNC System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed
![Ball Trajectory Machine](https://openbuilds.com/data/article_images/l/7/7887.jpg?t=1542989748)
Build Author
James Evanko
Views
3112
Ball Trajectory Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
CNC machine 700x1200mm
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I love to build things. I want a large cnc machine can do with little money. use Aduino .
![Welded project cnc first try](https://openbuilds.com/data/article_images/l/4/4352.jpg?t=1484756207)
Build Author
Ken376
Views
2842
Welded project cnc first try
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Kind of hard to see in this pic now lining up drive s and finishing framework
Stock CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!
C-Beam unit with 400W Spindle
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Standard (If there is one) C-Beam with plnth
![My DIY panoramic rolling (&banding) Machine.](https://openbuilds.com/data/article_images/l/6/6736.jpg?t=1519898186)
Build Author
Calotype
Views
2606
My DIY panoramic rolling (&banding) Machine.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
DO WHAT YOU IMAGINE !
LaserShark300
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.
![Quack Ball](https://openbuilds.com/data/article_images/l/6/6614.jpg?t=1519338061)
Build Author
hbtousa
Views
2348
Quack Ball
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
![My CNC](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Terone Burgenheim
Views
2073
My CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
![OpenPull From CNC Kitchen.. attempt](https://openbuilds.com/data/article_images/l/10/10239.jpg?t=1645386160)
Build Author
Gary Caruso
Views
1819
OpenPull From CNC Kitchen.. attempt
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
CNC Cutter Knife
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=1389472431)
CNC knife cutter with loline blades
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)