Welcome to Our Community

Some features disabled for guests. Register Today.

Workbee 1050 Y axis

Discussion in 'CNC Mills/Routers' started by Rob Atha, Jan 15, 2019.

  1. Rob Atha

    Rob Atha Well-Known
    Builder

    Joined:
    Aug 19, 2018
    Messages:
    21
    Likes Received:
    4
    hi guys

    I’ve hit a bit of a conundrum with my workbee build. I’ve followed the build video and backed off the y axis to the joining plates so they are touching before I tighten the lead nut blocks. But when I tighten he blocks up it evokes impossible to move the couplers at all. I have to back the lead nut blocks off about half a turn to get any movement. Is this right?
     
  2. Rob Atha

    Rob Atha Well-Known
    Builder

    Joined:
    Aug 19, 2018
    Messages:
    21
    Likes Received:
    4
    Hi all

    Just to let you all know that this problem is now resolved, after reading another thread about tight nut blocks, I followed the help there and ran an old t8 lead screw through the blocks a couple of times and this has now resolved the issue
     
    GrayUK likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice