Welcome to Our Community

Some features disabled for guests. Register Today.

Upgrading my CNC Router

Discussion in 'CNC Mills/Routers' started by jeffmorris, May 8, 2019.

  1. jeffmorris

    jeffmorris Well-Known
    Builder

    Joined:
    Nov 6, 2017
    Messages:
    282
    Likes Received:
    50
    I already built a CNC Router last year before the LEAD Machine was released. It is about 500mm X 500mm and I wish to upgrade it to 1000mm X 1000mm. I like the 250mm supports for the X-Axis gantry. I need a list of parts for the 250mm supports. I tried to watch the assembly video and write down the parts needed . I think I'll need 2 20mm x 80mm x 250mm V-Slot rails, 18 cast corner brackets, two 90-degree joining plates, lots of Tee nuts, drop-in Tee nuts, and screws. I already ordered 3 1000mm C-Beams, 3 1040mm lead screws, 2 20mm x 80mm x 1000mm V-Slot rails, and 6 collars. Do I really need extra wheels, spacers, and XL gantry plates? The LEAD Machine has XL Gantry Plates on both sides of C-Beams and my machine has plates on one side of C-Beams.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice