Welcome to Our Community

Some features disabled for guests. Register Today.

Screw whipping fix for Workbee 1000x1500

Discussion in 'Share Parts' started by Crossfixer, Jul 11, 2019.

  1. Crossfixer

    Crossfixer Well-Known
    Builder

    Joined:
    Aug 27, 2017
    Messages:
    3
    Likes Received:
    6
    B23B9996-F63D-45A2-AAF8-4B8B0FE0B6F6.jpeg 239D96CF-FBC2-4ADD-9C9E-92DC3C5FAB78.jpeg 9E2F5BFB-E0A8-4B7C-823C-33E0A21DD626.jpeg 8C197534-B4AF-41F0-A0BB-CA144271D5F6.jpeg F2087AE3-6C4E-487E-B8C3-039BB3F21F7E.jpeg
    Fusion 360 link for download
    A360

    Printed the guide springs with Taulman3d 910 nylon.
    Change the bolts that are in the screw blocks from 25mm to 20mm so that they do not protrude on the inside of the block.
    Fit 4x 8mm low profile bolts and 4x knock in tee nuts this allows the spring to move on the bolts as they bottom out on the extrusion.
    I have 2x on each side as it’s 1000mm x 1500mm machine, but I think 1 would be fine on 1000mm x 1000mm machine.
     
  2. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,655
    Likes Received:
    605
    Great job! :thumbsup::thumbsup:
    Any chance of a video? :rolleyes::D
     
  3. Alex Chambers

    Alex Chambers Openbuilds Team
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    789
    Likes Received:
    408
    Very nice - could I persuade you to post a copy of this in resources so it's easier for people to find in the future?
    Thanks,
    Alex.
     
  4. Crossfixer

    Crossfixer Well-Known
    Builder

    Joined:
    Aug 27, 2017
    Messages:
    3
    Likes Received:
    6
    Sure I can which heading would be best Parts?
     
  5. Crossfixer

    Crossfixer Well-Known
    Builder

    Joined:
    Aug 27, 2017
    Messages:
    3
    Likes Received:
    6
    I’m busy today but I’ll get a video over the weekend.
     
    GrayUK likes this.
  6. Alex Chambers

    Alex Chambers Openbuilds Team
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    789
    Likes Received:
    408
    #6 Alex Chambers, Jul 12, 2019
    Last edited: Jul 12, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice