Welcome to Our Community

Some features disabled for guests. Register Today.

OX Plates

Discussion in 'CNC Mills/Routers' started by plexer, Sep 15, 2014.

  1. Radoslav Valchev

    Builder

    Joined:
    Nov 17, 2014
    Messages:
    1
    Likes Received:
    0
    Hi , if somebody dont want ordered plates I am interested
    Thanks
     
  2. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hi Radoslave,

    I don't have any spare at the moment as they are all taken but I am waiting on payment from one person who I will give until Monday to pay,

    I am picking up the plates tonight after my sat nav got me lost last night and I will start shipping over the next few days.

    Ben
     
  3. oximoron

    oximoron New
    Builder

    Joined:
    Nov 26, 2014
    Messages:
    12
    Likes Received:
    0
    Once again, nice work Ben and lots of thanks.

    I have my ox test built with drill press fabricated plates and after testing I'm likely to fabricate my own designs so my Alu set are probably going to become available soon.

    Enjoy your builds everyone, watch out for the cut edges of the v of the v slot on the delrin wheels as you put the extrusion between wheel sets, especially if you test fit, tighten and remove. Eventually I realised I'd snicked a couple of wheels and I carefully filed over the corners watching not to scratch the the v further down the rail. This may be documented thoroughly in the videos but I'm a 'seek and scan' viewer...
     
  4. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hey Oximoron,

    Thanks for you updates, I have the plates I picked them up on my way home and will organise the shipping over the next few days so you should all get them next week.

    Ben
     
  5. Kris CNC Build OX

    Builder

    Joined:
    Jan 8, 2015
    Messages:
    1
    Likes Received:
    0
    Hi Ben

    First post here, are there any surplus plates from the group buy? If so I could send the funds via paypal, very interested in building an OX myself, kind regards, Kris.
     
  6. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Hi Kris,

    Not at the moment but if Oximoron wants to sell you his set then I'm sure we could work something out and I could send them direct to you if you organise between yourselves the payment or something as he's already paid me.

    Ben
     
  7. oximoron

    oximoron New
    Builder

    Joined:
    Nov 26, 2014
    Messages:
    12
    Likes Received:
    0
    As I said, mine will probably become available but I definitely want them for now. I need a set I know I can count on until I'm sure my revisions are an improvement...
     
  8. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Just to tease you all :)

    Will be posting them this week, sorry for any delay but work get's in the way of play :(

    Ben
     

    Attached Files:

  9. oximoron

    oximoron New
    Builder

    Joined:
    Nov 26, 2014
    Messages:
    12
    Likes Received:
    0
    Shiny! Nice! Christmas is coming twice this year... Thanks Ben
     
  10. Indieflow

    Indieflow Journeyman
    Builder

    Joined:
    Mar 28, 2014
    Messages:
    127
    Likes Received:
    133
    Teasing isn't the word! I hope you get chance to post them early on in the week as I'm off for the week and would love to get started on my build :)
     
  11. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
    Looking good

    Nice one Ben!
     
  12. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    If I get enough interest I'll get another set of 12 cut.

    Thanks

    Ben
     
  13. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    The first 4 packets have been shipped via royal mail small parcel service today and all the rest will ship tomorrow as long as I have mailing addresses for you.

    If you don't think I have a mailing address then please either message me here or send an email to the email address you sent payment to.

    Thanks

    Ben
     
  14. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
    Hi Guys,

    Just to say a big thanks to ben for sorting this out, I recieved my plates this morning and they look great!

    I suppose it's time to start putting this thing together now!

    Cheers,
    Chris
     

    Attached Files:

    plexer likes this.
  15. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    Wohoo :) glad they got there ok, they will need a bit of filing to take some of the rough edges off but I was happy.

    3 more packets will be posted in about half and hour but I still don't have postal addresses for several people I have tried to email you all.

    Ben
     
  16. Keith turner

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    7
    Likes Received:
    1
    Hi all,

    Just received my plates today! Many thanks to Ben for arraigning their production. They are great and will make a very nice machine. Once again, cheers Ben.

    Regards,

    Keith
     
    plexer likes this.
  17. Dutch

    Dutch New
    Builder

    Joined:
    Oct 27, 2014
    Messages:
    9
    Likes Received:
    0
    Hi Ben. Any update on when you going post them?
     
  18. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    @Dutch please message me on here or email me your address, everyone that is not listed on the first page as shipped I do not have addresses for as they never included them with their payments, I've emailed people yesterday as well going by paypal email addresses. I think yours got bounced back to me Dutch.

    I will post more tomorrow as soon as I get postal details and want to get them all shipped then really.

    Ben
     
  19. 1972

    1972 New
    Builder

    Joined:
    Sep 21, 2014
    Messages:
    24
    Likes Received:
    20
    Nothing 20 seconds with a scotchbrite pad and a needle file won't sort out!
    I only noticed a sharp edge on the 5 hole brackets all the other parts are spot on.

    Chris
     

    Attached Files:

  20. Dutch

    Dutch New
    Builder

    Joined:
    Oct 27, 2014
    Messages:
    9
    Likes Received:
    0
    Check my Paypal payment, my address in where. Don't want to type it here.
    Regards.
     
  21. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    @Dutch The message attached to your paypal payment was "Hi Ben. This is money for Ox plates from Dutch. Sorry for late transaction - just returned to UK from holiday abroad. Hope I'm not late. Regards." No address was there so please email me at the same address you sent the payment to as I've already said today.

    Ben
     
  22. Dutch

    Dutch New
    Builder

    Joined:
    Oct 27, 2014
    Messages:
    9
    Likes Received:
    0
    Just e-mailed to your box.
    Regards.
     
  23. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    @Dutch great will ship tomorrow.
     
  24. plexer

    plexer New
    Builder

    Joined:
    Sep 5, 2014
    Messages:
    93
    Likes Received:
    5
    I've just taken the last 4 packets to the Post Office.

    Ben
     
  25. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Excellent work Ben you have put a lot of effort into helping others along with their builds. :thumbsup:

    Tweakie.
     
    plexer, 1972 and GrayUK like this.
  26. Indieflow

    Indieflow Journeyman
    Builder

    Joined:
    Mar 28, 2014
    Messages:
    127
    Likes Received:
    133
    Ben,

    I second what everyone else has said, thank you ever so much for sorting out this bulk order and getting the plates out to us all :)

    Mine arrived this morning and look excellent.

    Thanks

    Simon
     
  27. treoer

    treoer New
    Builder

    Joined:
    Dec 29, 2014
    Messages:
    25
    Likes Received:
    0
    Hi Ben

    Please put me on the second round list please

    Mike
     
  28. alistag

    alistag New
    Builder

    Joined:
    Feb 9, 2014
    Messages:
    3
    Likes Received:
    0
    Ben

    Arrived safely on Friday ,many thanks

    alistair
     
  29. Jonesy

    Jonesy New
    Builder

    Joined:
    Feb 3, 2015
    Messages:
    4
    Likes Received:
    0
    Hi Ben,

    Can you add me to the 2nd list please.

    Sam.
     
  30. centurian

    centurian New
    Builder

    Joined:
    Dec 31, 2014
    Messages:
    28
    Likes Received:
    1
    Hi Ben
    Already had a set of plates from a Euro firm with the holes drilled in the wrong places. Even with all the eccentrics turned outwards I couldn't get the track anywhere near the wheels. Like an idiot I tried to rectify this by enlarging the holes and messed it up completely, so I couldn't return them.

    If your still looking for customers for your list, then count me in.

    Let me know how you want to be paid.

    Michael.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice