Welcome to Our Community

Some features disabled for guests. Register Today.

Lack of inventory of Vslot Extrusion

Discussion in 'General Talk' started by Nick Lancaster, Feb 4, 2014.

Thread Status:
Not open for further replies.
  1. rdaa

    rdaa Well-Known
    Builder

    Joined:
    May 2, 2014
    Messages:
    2
    Likes Received:
    1
    Hi! It seems your V-slots profiles are out of stock again... I've looked in several stores and all of them are out of stock for 20x80 and 20x60 profiles, do you know when they will be re-stocked?
    On the same topic, is there a way to know (by receiving an email, etc) as soon as it's back in stock, so we don't have to check the store every day/2 days?
    Thanks in advance! When those profiles are back in stock, I'll be able to build my cnc, so I'm very excited hehe!
     
    mybuild14 likes this.
  2. mybuild14

    mybuild14 Well-Known
    Builder

    Joined:
    Mar 20, 2014
    Messages:
    23
    Likes Received:
    5
    I too am close to ordering my parts for my OX build, but can not seem to hit it right when all the parts are in stock at the same time. Is there an update as to when out of stock parts are due to be in? V-slot, acme lead screw. Getting anxious to start building. Thanks guys.
     
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,338
    Likes Received:
    1,771
    mybuild14 likes this.
  4. rdaa

    rdaa Well-Known
    Builder

    Joined:
    May 2, 2014
    Messages:
    2
    Likes Received:
    1
    Hi!
    Thanks for your help!
    I'm preordering the out of stock V-slot profiles, but I see a problem with 2 products: Spacer Block and 8mm metric lead screw. They're out of stock but I can't even preorder them, any ideas?
     
  5. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,338
    Likes Received:
    1,771
    Hello @rdaa we will have these both stocked soon (approx 2 weeks) as well as many more parts. :thumbsup:
    Thanks for you support and understanding.
     
    mybuild14 likes this.
  6. Jaros

    Jaros New
    Builder

    Joined:
    May 19, 2014
    Messages:
    1
    Likes Received:
    0
    Hi,
    I am trying to drop order for last few weeks and combine everything in one shipping as much I can, but there are constantly missing items in store. Items that are important to build anything. Can I get approximate date to visit Your store and make comfortable purchase without hassle and recreating my cart over and over again.
    I know I can go to ACE store and spend another hours looking for screws and plates, but I dream about one stop online buying experience...
    regards
    Jarek
    Salt Lake City, UT
     
  7. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,338
    Likes Received:
    1,771
    Hey guys. Things are happening over at the OpenBuilds Part Store. We know that this delay can be frustrating at time especially when you are in the middle of a build. Just to let you know, we have been in the process of working out new samples from new manufactures, so its taking a little longer than expected. We are working closely with them to ensure quality continues. Many parts are set up to be completed by the end of this week and we will have them shortly after.
    The Part Store will be updated right away. We apologize for this extended delay but it will be worth it as we move forward with future OpenBuilds parts and accessories.
    Thank you all for your understanding a patience
    Mark
    OpenBuilds Team
     
    mybuild14 likes this.
  8. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Resident Builder Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,075
    Likes Received:
    959
    V-Slot is back in stock. Yeah!!! :thumbsup: But I have no use for it without screws...... :banghead:

    When can we expect the M5 low profiles and the 8mm lead screws to be restocked?
     
  9. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,648
    Likes Received:
    595
    Are the V Slot profiles produced in the States and shipped to the UK, or do you have a producer over here?
     
  10. Colin Russon

    Colin Russon Journeyman
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    46
    Likes Received:
    21
    We order from openbuilds to ship to UK, as far as I am aware all resellers do.
     
  11. bobt

    bobt Veteran
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    89
    Likes Received:
    37
  12. Colin Russon

    Colin Russon Journeyman
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    46
    Likes Received:
    21
  13. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,338
    Likes Received:
    1,771
    @GrayUK V-Slot is shipped from our warehouse here in the US in large quantity to OpenBuilds distributors in the UK as well as all distributors. We are also working up a standards agreement to keep V-Slot version/tolerances and quality levels the same no matter where you may find it.
    @Rick 2.0 ETA on OpenBuilds screws is about 10 days. We are adding a lot more to the inventory over the next few months so its taking a little more time to complete. We are making a lot more and adding them to the production schedule to ensure we have them in stock moving forward.
    Thank you
     
    mybuild14 likes this.
  14. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,338
    Likes Received:
    1,771
    Hey guys,
    To keep things going to the right places, we are asking that for future part store order questions, please fill out the contact form located here:
    http://openbuildspartstore.com/about-us/
    This will help us to stay organized, get your questions to the right people and stream line the response process. :)
    Thank you for your help
    Mark
     
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice