Welcome to Our Community

Some features disabled for guests. Register Today.

Delrin Mini V Wheel w/ 1/4" Eccentric Spacer

Discussion in 'General Talk' started by 6of1, Jul 21, 2020.

  1. 6of1

    6of1 New
    Builder

    Joined:
    Nov 13, 2018
    Messages:
    4
    Likes Received:
    0
    I am in the planning stage of a project and I have a few questions.

    I plan to build 2 axis. Both will be using 3 Mini V wheels (two 1/4" alum spacers on one side & one 1/4" Eccentric on the other side) bolted to a .25" plate.

    One will be on a 20x20 V-Slot Rail and the other will be 20x40 V-Slot Rail.

    What is the hole spacing on plate for 20x20 and the 20x40 rails?
    (I tried to find a drawing of the "Mini V Gantry Plate")
    Are M5 x 30mm the correct screw for spacers and wheels?
     
    #1 6of1, Jul 21, 2020
    Last edited: Jul 21, 2020

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice