So im thinking about re-designing my home brew. specs are as follows: bb for controller. 1605 ball screw (2 on the y, 1 on the x, t8 screw on the z). With the new design im thinking about doing a center screw on the y so it will free up one axis. If i do this it will free up a driver on the bb. can i use that for a rotary?
You can run a rotary of X or Y: Called Wrapping: Rotary Machining and Wrapping - VCarve Pro V9.0 User Manual See Giarcs use of the functionality in LEAD Lathe Still involves swopping the rotary into X or Y - and locking X or Y in place above the rotary
