Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Im new to CNC and got my feet wet with an OpenBuild LEAD1010 CNC, no regrets so far. I would love to try a bluetooth interface for the...
Hi all Sorry if this isn't the correct place, but I'm using the 1010 with Blackbox controller. Someone has given me a XYZ probe for free. BUT it...
I am setting up a Mophorn 220v 4KW air cooled spindle with an A2-8040 VFD Have read through the Openbuilds documentation for setting up the 0-10v...
OpenBuilds Blackbox has been working fine. Today the motors are not engaging at all. Have tested that 24v power is getting to the Blackbox....
When it works its great, but I have broken about 4 bits now when the Z will not register. So maybe i'm doing something wrong or there is an issue...
I am setting up my blackbox for a large custom router table that I built. My X axis and Y2 axis are operating in perfect sync just like Y and Y2...
Forgive me for asking the dumbest question ever…but...is the BlackBox AUX1 port meant to send data out of the BlackBox or receive data into the...
Hello Openbuilds Community. I'm new, This is my First Post! Colin Quinn here. I'm a cinema robotics visual engineer guy in Atlanta for a film &...
I use blackbox with VFD controller, I would like to give startup permission to the VFD with blackbox's onboard relay. ( i'am not satisfied with...
Newb question: Got some Xtension Limit switches installed on my two axis machine and have been trying to figure out homing. When I press the...
I've been using my BlackBox controller successfully on a 2-axis plotter for about a year now. In the past 2 months, every time I home the machine,...
Just hooked up my blackbox and now diving into the Control software (very new to CNC). I have a project that requires a series of looping gcode...
Hi all For a couple of months not I have been having issues with getting my Blackbox controller to run my Workbee 1510. Slowly I have gotten to...
Hi All I have a very simple, however I think important question. Recently I finished to assemble my control box, using Arduino board with 4...
Hi, This might have been asked before but I am having trouble with jogging X+, it moves ok with X- as do all the other axis, I have checked all...
With CONTROL connected, if I shut my machine down, CONTROL stays connected to my BlackBox. if I unplug the USB, it disconnects. Is there a way to...
Today's shelter-in-place project was to tidy up my electronics & cabling & hook up my wireless feed hold. I'm using this remote control relay....
Hello, i would Like to Know if There is one post processor blackbox compatible with solidcam (solidWorks) and cambam if not, Can i do something...
I am trying to connect my BlackBox Controller to a Windows machine that does not have internet access and that apparently needs to update the...
Hello, I have a kit-built CNCRouterParts (now AvidCNC) 4'x4' CNC router. The machine is about 4 years old and has always been plagued with...