Separate names with a comma.
Some features disabled for guests. Register Today.
Just a tip. A mid sized screw style C-Clamp is great to seat those bearings in the wheels without damage.
23 pounds and 6 ounces
An OX! Thurmond
My take is "Plastic Flexes". Build all metal either with lost plastic metal casting or proper angled cuts and bolt metal to metal if flexing is an...
Mark....I noticed a Delta style machine in the examples BUT it had 6 axis's. What is this style called or is it fictional currently? Thurmond
I was somewhat daunted by grooving the bearing but it literally took 30 seconds with my dremel and a thick cutoff wheel. I used a thin rubber band...
I will see what I can do tomorrow afternoon. For pocketing think Crash Test Hobby "Fly More - Fix Less" EPP planes and pocketing for the...
Yes exactly like a saber saw. I tried some pocketing on some scrap EPP today by hand and it worked great. I am running much lower speed though. I...
Hey David, As you might imagine, I really like the re-purposing of the spare flywheel. I picked up an assortment of "Tips" at Harbor Freight...
OK sorry I was not around yesterday. Here is a modification I made pictured below. I used some .030 mig wire I had around for Skew Planar...
Well mounting a bearing was as simple as removing one of the button heads and replacing it with one 5mm longer. Two 3mm washers were placed under...
No X-Mount as they were for the Iris+ which did not use them. The Black prop adapter uses the standard right hand thread nut. The package...
I did run it up to full speed as is with a 3S LIPO and I was able to hold it with 3 fingernails clamped to the base so the flywheel balance is...
Well I am very happy with the flywheel. I enlarged the center hole to 4mm to match up with the 3DR closeout Iris+ motor shaft (unbranded T-Motors...
Link to the phlatforum Post: http://www.phlatforum.com/xenforo/threads/perforator-style-foam-cutting-head.2836/ It has evolved significantly...
Hi, I suggested David post this GREAT idea over here because I know, like me, several would find it a much better alternative to a small laser in...
I just purchased a NUBM44 bare head with driver assembly from here: XYZ Mount Modules - DTR's Laser Shop 6.8W at full power. It will need...
.1mm bits for Circuit Board Routing. ;) Thurmond
Many use Carbon Arrow shafts for rods with magnetic ball ends attached at each end. My CF shafts are 4.5mm X 825mm. Do a google search for...
Cut the cans in a spiral pattern and I bet the strips will be over 8.5" (won't help on thickness though). ;) Thurmond