Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks Ryan, I'll try a few more feedrate tests and load a fresh bit and see what comes of it, I just loaded a new spoiler board so I have to...
Sure I can try in MDF or if I use alupanel again try some sort of light oil. What would you recommend for MDF Ryan. Glad it sounds like only on...
The motors are set to the default 1/8th step. The circles and squares are cutting and joining perfectly, So I've tried two things, I believe it...
Here is a quick circle cut from alupanel. 1/4" end mill speed about 50 IPM. 1 pass. No rocking in the z axis. I'll keep looking for solutions....
Hi guys, I've been away a while playing with the Workbee. Mine is the 1500x1500 belt drive. As I'm getting more busy with projects on it there is...
My setup is over a network, I use Illustrator to make my vectors. Then I import into Aspire. I use aspire to save a .tap gcode file. I then access...
I got the full kit and I had an entire extra bag. I think it's intentional :) At over 18m its pretty high so my z-travel is really restricted. But...
Not sure if you can see them but I took a few pics., My board is 48" wide by 50" deep. One M5 in each corner. Holds it down nice. Next step is I'm...
my spoiler board is over 18 mm thick. was an inch when I started. I drilled a pocket down about half way and then used a drill to make a small...
Jim Great work. Ryan, I believe I got my issue sorted. I changes units to inches in UGS and Aspire. And I also found that my Z axis wasn't low...
Thanks Michael, I think I'm ok now, we'll see. I can't test yet as Im waiting for my Electrician to wire me into 220 so I can use my router. It...
I remember threading the Z screw through the block was difficult as the block nut was on a bit of a slant from the two m5 bolts going through, I...
I looked at mine and did a video. Are you talking about the dragchain? Or the acme screw. Here is a link to my video [MEDIA]
hmm, not sure im out of the woods yet but I used a stable build of UGS as opposed to a nightly build and it seems to have cooperated. Was able to...
ok i think thats a lead. Im not cutting anything yet. I dont have the router hooked up yet. I'm just in the testing phase. So I'm not setting...
yes, machine homes perfect. it limits at each switch and backs up -3mm. From here I believe I hit reset zero.
here are the errors, running mm/min in aspire, datum is upper right corner,(same as machine home), units mm, post processor (gcode mm.tap), cut...
No actually I can't actually get it to cut. It errors out. I'm positive I have a setting off somewhere. I get some sort of gcode error in ugs and...
well after many winter storms and power coming back online over christmas I got everything together for testing. Machine is working good, limits...
Shipped from Ryan monday, I gort the first package wednesday. Then the following two packages yesterday. Here it is all laid out and ready to...