Separate names with a comma.
Some features disabled for guests. Register Today.
how big has anyone expanded the x axis? I'm thinking of wanting at least 2" - 3" more than stock. I think I just need a larger c beam and rod to...
What is the most aggressive anyone has cut aluminum on the mini mill so far? I'm using a 1hp router and have been able to run a 1/8 kyrocera end...
Small picture holder themed for valentines day. Great gift or home decoration. -I made this on a Mini Mill with 1/8 kyrocera end mills. I ran it...
The cad models are online, but the tapped holes are arranged 60mm x 100mm
There are 4 tapped holes on the gantry plate. They are M5. i just cut a square and then countersunk for 2 M5 bolts and just screw into the wood to...
Just uploaded one of my first projects on the mini mill. If anyone reading this is thinking about buying a mini mill, then the answer is yes you...
[ATTACH] Cut this in about 20 minutes total on my Mini Mill. I finished it with a deburring tool and some 320 grit sandpaper. It cut great on the...
Wow this thing tears through hdpe. I had it set to 1000 mm/min at 2.5mm doc on an 1/8 end mill and it had no problem at all. I now need to make...
I felt mine was tight too, but you really want to make sure there is a bit of preload on those bearings so the machine is stiffer. My machine is...
I have noticed the x axis clicking sometimes. Any ideas of what is causing this.
Just got my Mini Mill working today. I cut some HDPE with ease and then stepped up to 60601 aluminum. It cut fantastic with these 2 flute 1/8"...
I assume you know this but you said you were a noob and this was an impulse buy, but you do need a controller, power supply, wiring, etc. As far...
Exactly what end mill are you using? Thanks.
Foil tape? Maybe
I think Im going to go with the kit, but get a 24v power supply. These steppers have about the same torque as the ones open builds sells with the...
Thanks for the response. Okay, I can probably find steppers around 200-300 oz in on steppers online, but I have no idea how to find a control...
I'm also looking at this kit Zyltech Arduino CNC Kit w/ UNO + Shield+ Nema 23 Stepper Motors + DRV8825 + PSU | eBay for the steppers and control....
Will the makita 1 1/4 hp 6.5A router fit? It goes down to 10k rpm so I think that would be a good choice.
