Separate names with a comma.
Some features disabled for guests. Register Today.
Anyone have or know of a mount for an Endurance 10w laser to the C-Beam? I've looked on Thingaverse and though there are a variety of mounts...
Peter, I'm using the Blackbox to control my C-beam with an Endurance laser (10w). I'm assuming that within Openbuilds CONTROL I still need...
Thanks. I changed the default feed rate in Estlcam from mm/sec to mm/min and redo the tool path. I took a look at the gcode and the F word had...
I may have found an answer. Even though Estlcam allows me to set feed rates as mm/second, the Blackbox is seeing that feed rate as mm/minute....
OK, is that a one-time setting? I assume it is and that it won't change unless I change the profile of controller. Bottom line, I'm trying to...
I thought I had everything working; however, in my first test run, each axis moved a lot slower than expected. I'm using Estlcam to generate my...
Just powered up everything without the laptop. Now the red "!" under the Y axis current adjustment turned on in addition to the Z axis. After...
OK loading the C-Beam profile fixed the problem but not before crashing my laptop again! I've figured out that you cannot plug in the USB cable...
FYI, I had the same problem. My laptop shut down twice. (posted this separately before I found this post) I thought at first that the USB cable...
Yes I'm Using OpenBuilds CONTROL. I'll have to try that tonight when I get home. I couldn't find much in the way of documentation on how to use...
Hooked up my Blockbox today for the first time. My laptop connected ok but as soon as I powered up my power supply my laptop rebooted. This...
Does anyone know how to mount a DW660 to the C-beam gantry plate with out having to take it apart every time I want to switch out the spindle?...
I'm using an Arduino uno with a CNC Shield with A4988 driver modules. Can't decide on 1/16 or 1/8 but leaning to 1/8. Any recommendations as...
Good to know; I think I will do that. Assuming nothing unforeseen I should have it working this weekend.
Great! Thanks for the quick turnaround.
I’m doing my first build and all is going well, but I do have a couple of questions. First, not sure I know how to adjust the Anti-Backlash Nut...