Separate names with a comma.
Some features disabled for guests. Register Today.
How are you generating your job? Somewhere, and I can't for the life of remember where... maybe in your CAM settings or the post process,...
I had a few spare minutes, and was able to find the files. I've attached the STL for the motor mount and a DXF file of the pieces I cut out...
Glenn, Thanks for the inquiry. Let me look up my files for the project, and I'll get back to you. Hopefully later today or tomorrow. But I...
Definitely a cool idea. The success you'll have here is going to depend on the type of video rig you're going to mount to the system. First,...
I've got a question about the 1515. Description mentions working with 4' x 4' sheets, but the specs list the working area as 46" x 49". My...
Good luck! There is a TON of little things that go into these machines. I was initially thinking about building my own, but in the end, I went...
Thanks for reaching out. So, there are a few printed parts involved here. If you take a look a look at the picture below, the grey piece is...
The short answer is yes, it's possible. You're basically just streaming gcode commands over a serial link.
It does remove the ability to power via USB, but not the ability to connect from your PC. You can connect from the PC directly to the Blackbox,...
Sure... these may not exactly work for you're particular setup, but you're more then welcome to try them. There's 4 total STLs. One that...
Make sure you follow those directions to update from Control Specifically, make sure you hold down that "mode" button when you hit the reset...
Like I said, I might had been having this issue before, I just never noticed. I only noticed this time because I had run a small job, and after...
Here's a shot to show what I'm talking about... notice it's switched to continuous, but the increment selections are still there. (It was in...
You may be on to something... I took a video of the behavior in case someone wanted to see it. Just took a look, and it looks like the slider...
I've experienced an issue since upgrading to the latest (1.0.274) build of CONTROL. Connected to a Blackbox. When I first connect, jogging...
Yep!
I've got the entire assembly in an enclosure. (See the above pics I posted...) There are two doors on top missing from the pics. Long run,...
Received mine today! Can't wait to get home and give it a go.
I don't have a better picture right off, but if you look at the attached picture, you can see what I did. If I need to adjust my z height,...
Right... the smoke can dust can foul up the laser lens. You wan that air to blow that stuff out of the way, so it doesn't ling around the lens...