Separate names with a comma.
Some features disabled for guests. Register Today.
After creating text, draw a rectangle at the bottom of the text so that the text can stand up. Use scissors tool to cut out unnecessary lines and...
Someone drove me crazy creating the sign but I was able to cut the sign on the machine.
I already draw around the lines and two persons. I entered text. The lines, persons, and the big "K" are OK using 1/8" bit. The text won't appear...
[IMG] This is the sign that I'm trying to create for someome. The small letters are about 1/2 inches.
The sign has letters about 1/2" high. The sign will be on oak board. Are there single-line fonts similar to Times-Roman font?
I am asked by someome to make a sign for her. I have Dewalt DW618 router and VCrave Pro. What's the best feed rate, feed speed, and deep of cut...
Someone asked me to create a sign from an image. The image was not good quality, I tried Inkscape, GIMP, Paint.Net, online websites, etc....
When changing bits, just probe Z-axis. Don't probe X and Y axises.
AutoCAD has "Purge" command that lets you purge unnecessary objects from drawings. Does Fusion 360 have similar command?
Put the old wheel over something that has a hole large enough for the bearing to fall off. Use a flat-blade screwdriver to push the bottom bearing...
The connectors are next to the motors and I used zip ties to secure them to motor standoffs and to keep them from coming apart.
I have Xtension Connector Sets. This morning, I heard grinding noises and I aborted the job. I checked the connectors and found out that wires or...
David, I have an ESP32 Huzzah32 board. Is it possible for it to control 4 stepper motors, three limit switches, and Z=probe?
At least 10 years ago, my shop teacher got me a CNC router built into a cabinet. It was used by a school. I had to replace the electronics with...
My Porter-Cable 690 router stopped working due to worn-out brushes. It also made loud noises and I thought it had bad bearing. My shop teacher at...
The chips may stop the gantry from hitting the limit switches.
I found out that a small piece of wood prevented the gantry from hitting one of the limit switches. After cleaning out the "table" that the...
I think that V1.0.369 caused homing problems. Homing worked in V1.0.368
There may be problems with the limit switches. When I try to home the machine, the machine homes Z-Axis first and then tries to home X-Axis and...
Stepper Motors and Arduino - The Ultimate Guide (howtomechatronics.com)