Separate names with a comma.
Some features disabled for guests. Register Today.
Thank you so much that was the actual issue I think the problem is fixed now
Thank you
These are the settings I have for The X pro and the drivers dip switches and the method I use in connecting these drivers this is a sphinx build...
I ordered all parts form openbiulds so yes I’m using tr8*8-2p Is there a different method of controlling the cnc Without the use of an xpro I...
In order for me to get the proper travel On the CNC I had to set steps/mm at 999.1 is this the correct method of fixing the issue or will it cause...
I have the dq542ma set at 1600 with the dip switch’s and I have 199.100 for $100,$101,$102 is there anything eles I need to do to have 1/8 stepping?
Those are the exact values I have for my steps per millimeter Should I increase the values. Also the machine is traveling slow this may be...
Thank you for the reply I have my dip setting to 1600 but When jogging the machine 100 mm it only travels about 20mm This is the same for every...
hello openbiulds I'm having issues on a sphinx cnc built that I'm currently working on. I have wired up a xpro-v3 to 4 dq542ma controllers and...
Here’s a picture of the quickset up I made
On my DQ542MA with a nema 23 hi torque stepper motor what should my microstep dip switch settings be
Thank you for the reply Are these controllers meant to be wired with the Xpro ? if so how would One do so, is there a diagram that can indicate...
hello open builds forum I recently built a CNC based off of the sphinx design and used NEMA 23 Hi torque steppers with Xpro v3 controller, I’m...
