Separate names with a comma.
Some features disabled for guests. Register Today.
Yes! The original axis default somehow changed. I fixed the original sketch to Z top/bottom (old origin) and ran the toolpath and it was successful!
This maybe the problem. My new files are defaulting to a strange origin see attached...The old Origin with the Z axis top/bottom worked.
I changed it to "1" to see if it processed. It did NOT. Still get the same error.
I did specify WCS. I chose from "selected point"
[ATTACH]
I have been away from my machine Lead1010 for about a year. I was using Fusion360, everything working fine. Now, I can not get it to PostProcess....
So, question that “profile” contains calibration?
But you need Profile on a thumb drive to initialize thumb drive?
Trying to understand Calibration using interface and USB. Question is: after you calibrate axis, is that calibration stored in the Profile or is...
I'm good with tabs❤️
I've been reading about downcuts bits. If it packs the sawdust to hold a work piece will a vacuum defeat the purpose?
Holley published a new build: Lead1010 build Read more about this build...
Lead1010 CNC with the Blackbox, Openbuilds interface, Dewalt router and enclosure
Link to that Feeds/speeds table?
If the Wizard is used is the potential backlash addressed?
Ok. So after you do the math, 100/125 then where do I input?
I have a Lead 1010, high torque steppers, end stops, black box and interface.... machine is off moved both x & y axis 100mm and machine moved...
Got it. However, I am using the Interface controller. And curious, $23=3 is front left, is there a $23=1 and $23=2 for my better understanding of...
So...Z homed correctly. Then XY wanted to go to the Right/Back, not Left/Front. I understand there is an invert homing (but I don't want to change...
It wasn’t the toolpath and processor, it was homing. The Z axis started with a Z-10 I homed the machine and it is fixed.
