Separate names with a comma.
Some features disabled for guests. Register Today.
I was originally using v1.09 of UGS. Once I started using v2, the status worked ok
Ok well I thought I'd try a test cut in alluminium as so far, I have only cutr wood with my CBeam XL Sadly a test cut at 800mm/min with a 6mm 4...
Odd - Even if I try upload into the Assets tab - which should do necessary conversions, the dxf and the skp files all come out with no bodies....
Ah ok well for some reason they imported just as flat sketches. I’ll try another method later as I think I used wrong method with no conversion. I...
That looks good. I'm hoping to do a simplar thing with my CBeam XL.. I have bought two 1000mm Cbeams and screws but guess I need wider Y plates...
Yes good idea and could fasten in with some copper tape to complete the 4th side. Embarrassing admission is that I have now found my false limit...
Very useful article. I've ordered a set of these and some stranded twisted pair sheilded cable. Hopefull will all go together ready when I...
Thanks will take a look at those and will also try and send you my f3d file...
Very interested in this as the XL width limit means I have to cut guitar bodies in two halves. I thought thos would be reltively easy with...
You mentioned above about also earthing the frame of the CNC. Would this go to the earth tab of the switches and board? Can I use one ead to the...
Hi all, I just had my first hard limit error about 80% through a largish program. I WILL BE FITTING FERRITE RINGS to the sensor wires as my...
Re the ferrite rings - Having just said "so far I havent had any probelms with the limit switch wires", I have just had a false hard limit error...
I tried the minimumChordLength or minimumCircularRadius to .5 and this didnt help. Havent tried the allowedCircularPlanes setting so will give...
Hi swarfer - I did try yours but I still get error 33s from that for many G3 moves - even with 4 decimal places set.
Actually I did buy some ferrite rings when I bought all the switches etc. Havent fiutted them yet as the current wiring is a bit "temporary"...
Well I kept upping the X and y max and gave up around 4500mm/min as that maybe alot of stress on the machine stopping from that speed!! In the end...
I’ll hopefully have a play tomorrow to see how those speeds work at least as unloaded jogs initially. How does acceleration value relate to feed...
Thats good. Would reduce the work time quite a bit. I assume DOC is depth Of Cut so "Step-down" in Fusion terms..? Is the single flute for better...
So far I have only tried UGS (Classic and Platform versions) to send the grbl code and setup the machine. I use Fusion360 to do the design and...
Quick Question with probably a long answer... If I have built my CBeam XL with Nema 2305 motors and xPro v2 board - standard 8 uStep, what is the...