Separate names with a comma.
Some features disabled for guests. Register Today.
So I recently had to buy a new laser tube; my water chiller blew a fuse and when I replaced it a largish air bubble got in somehow and the whole...
Oh I didn't even realize I put it in the wrong section! Thanks so much! I'll try that!
So I ended up boiling some distilled water to get all the dissolved air out air out, and mixing that with a 4-1 mix of propylene glycol and it...
I am, but it's just like the gallons of distilled water I got at fry's. Is that sufficient? That's all I used with my last tube I think.
Thanks! I did try that actually and it seemed to help, but the bubbles just all come out of nowhere. How much soap is too much? I put like 3-4...
It didn't. :/ It helped my initial problem of bubbles before I turned on the machine, and it seems to help the bubbles not stick as bad to the...
So I recently had to purchase a new laser tube. My water chiller blew it's fuse so after I took it out, fixed it, and put it back in, apparently...
Excellent! Thanks!
Wait I'm sorry just to be clear; like dish soap for hand-washing dishes? Or like dishwasher detergent? I'm assuming the soap, but my brother asked...
Oh smart! I'll try that! Thanks so much!
Ok I think I get it. So I use lasercad to modify like the maximum output settings so that no matter what I put in the output for the job, I'll...
Ok perfect! Thanks I'll do that! The tube I ended up getting was a Yongli A2s (90w Co2 Laser Tube-yongli A2s 11000 Working Hours - Buy A2s Laser...
Thanks for the help! I do have an ammeter installed, but I've actually never gotten it to work properly. The PSU I have shows how many milliamps...
Hey I'm hoping someone might be able to help me here, I can't find much of a straight answer elsewhere online.. So I built a 100W laser cutter...
More problems have arisen I'm afraid and I was hoping someone might have an idea how to fix it. :/. The first question is: I live in Arizona and...
Ahh makes sense. I only ask because my before all this I had one problem that was solved by setting the pulse/rev setting to a higher number, and...
Thanks for the info! Maybe I'll just try switching to an xpro haha. So you think it is a problem with the controller then? and not with the...
Oh good call. I should definitely install those! It still doesn't really fix my problem though, it still gets off calibration somehow or something...
Ok interesting. so my vertical axis is backwards too? Why does it print right side up when I do the test cut then, I wonder? How do I know which...
Hey I'm having a little trouble with my motors. I'm using the Nema 17 and Nema 23, along with the DQ542MA Stepper Driver as was suggested in the...