Separate names with a comma.
Some features disabled for guests. Register Today.
I'll have to take your word for the smoke points, when I researched it Canola oil smoked at about 200 Celsius which is slightly less than what...
What's the concerns with smokepoints and oil breaking down? I use a few drops to lubricate the trip through the Bowden tube, but I've also...
Well after a lot of trial and error, I've come to the conclusion that dual extruders just don't work. It's almost impossible to get them at the...
No idea why it doesn't bounce back to the same spot, I guess it only takes a small difference on the Z bar's wheel to make a big difference on the...
Moving the back build plate mounts onto the Z bar, wouldn't move a lot or weight, where they are no is reasonably close to the Z bar anyway, so...
My machine is 650mm from base to top. I've set the print area to 350mm, it seemed like a nice safe value to start with, and I haven't been...
It seems to be having some issues with the files.
Yeah, don't worry about me, I don't know what I'm talking about. There's something in Slic3r that is causing it to not work at the speeds...
Hi, I finally moved the end switch onto the carriage. [ATTACH] Here is my modified carriage back plate but I doubt it will be much use to...
Hi, What is the 1.8 multiplier, you've applied to the 60? My settings are turned down till I debug why the skirt isn't sticking, the skirt...
Hi, Your speed settings are interesting, mine seem to be a bit higher. I had lower from 450mm/s down to 100mm/s because I was having to much...
Any electronics store will have loose micro switches available. I brought some of these...
No the heat breaks can't be shortened, Does it make a difference how long the heat break is? Actually there is a adjustment screw inside the heat...
I got the dual hot ends sort of working. Here's a picture of a checked cube. [ATTACH] Notice the ghost cubes on each side that is caused by ooze....
I just discovered that I had the X axis going from left to right (as you look at the bed), so everything is being printed out as a mirror image....
I'm having multiple problems as this photo shows. [ATTACH] The large crack, is because I had it all bolted up and then loosed and fiddle with...
I used 40% rectangular infill, and so far I've managed to crack every single part, I'm going to have to do them all again with more infill, so I...
Hi, The extra bracing on the front is to hide that gaps where extrusion joins, I didn't manage to cut it millimetre perfect so it has gaps...
Hi, I'm using Aluhotend's, I originally had them on your dual carriage design, they fitted nicely although I had to reduce the groove mount by...
Hi, Yep, I'll run dual extruders the new thermistors turn up, I only have enough to run one hotend at the moment. I had to make the carriage...
