Separate names with a comma.
Some features disabled for guests. Register Today.
I use it mainly for control as it is in my garage. I am able to run Aspire on it for adjusting and reposting if needed.
I've been using a fusion 5 tablet with no issues and inexpensive.
Maybe this is a good time to learn some Java Script...
Thank you!
incremental & continuous jog ok on touchscreen (Fusion 5 win 10) - macro buttons too
Windows tablet PC touch screen, no mouse or keyboard. Has worked fine up to this point.
Yes, dawned on me that that was the problem. Some days are better than others. I did edit the post afterwards and noted that the incremental...
Thanks for including custom probe capability! v1.0.226 incremental jog not working on control screen, continuous works on both control screen and...
I I also have disappearing macros
just tested with my probe, works fine. If you need an algorithm using the hole that does require known bit size, let me know. I couldn't get...
I have my own touch plate and currently use the exterior edges. I have attempted to create a macro to use the hole and eliminate the need to use...
set to 2, works fine when controlled from panel potentiometer. will confirm motor spec.
I finally found a VFD parameter setting combination that enables start and run of 1.5 kw spindle using 0-5v from control board. However,...
Can the Openbuilds-Control software 3D view show the portion of the tool path that has been completed (i.e., change color)?
This appears to be the same VFD as the one I have from the terminal names. I wired the spindle motor control wires to the Vi1 (I assume Voltage...
“Subject to change without notice”
My paper manual states that when using 0-5v that no jumper is required. I will give it a shot though, thanks
VFD is YL600-A-1.5KW-110V link to manual
Attempted with revised vfd settings for external control, no luck. Tried with both grbl min $31 at 0 and at 7200, no difference. Made note of...
I looked at the Spindle Direction and Coolant pins and didn't see any changes with M3/4/5 comm Spindle control pins from xPro-v4 to VI1 & GND on...
