Separate names with a comma.
Some features disabled for guests. Register Today.
Hi MotGor How its wired: [MEDIA] For the v3 you can use the screw terminals instead (look at the second picture) : CNC xPRO V3 Controller...
Is it just me or does the link in the first post not work any more?
The most important thing is that it works. But for me doing what Gary advised (putting 0.5mm under the lower belt and gluing it) made a HUGE...
Have a nice trip, and we are looking forward to the conversion list :)
Looks great, can you create a parts list for people who has the OX if they wanted to upgrade to WorkBee ?
I bought mine 8 months ago. And it have the same print on the back as the one Gary posted. Im a bit confused, is it the print on the back that is...
I just checked and I have soldered for fast decay as shown on this picture CNC xPRO V3 Controller Stepper Driver That should be correct?
I will do this later today. Thanks for the tips, I will come back with the result :)
Yeah just tried at the end, seems to come of pretty easily. And of course, I could just flip the extrusion, why didnt I think of that! :D
Loctite :( So I have a bit of work infront of me. Do you have a link to what you used between the belt and the rail ? And thanks alot for the...
Hmmm... I dont have anything under my lower belts, I thought the double tape was only to hold it down. Yes it seems like its only under rapid...
I already have soldered it to fast decay, but I didnt notice any difference. So you are saying I should try to solder the other pair instead ?...
Hi Gary. Its a long time since I did the dual belt, so yes it might have started at that time. For securing Im using the same methods as without...
Hi all, I have the OX 750x1000mm. Running the NEMA 23, xPRO v3 and a 24v powersupply. (all bought from Oozenest). I have over the last ½ year...
What current/amps should each motor have for the OX build ? I have the - NEMA 23, peak current = 2.8A/Phase motor (NEMA 23 Stepper Motor) - xPRO...
Great I will try them all, wasnt sure if Fusion would take them into consideration when going from homing to "start position" or just under the...
Thats what I have done too, and the added benefit is that turning the supports 90 degrees and mounting my spoilerboard to them have made the...
Nice carving. May I ask a few questions : 1. How did you hold down such a large piece of wood ? 2. How long did it take ? 3. What software did...
Hi David, Sorry for the long delay answering, summer holiday :) Stupid me, never noticed the tab :) Anyway it seems to work, only one thing I...
Hi all Im using GRB-Panel/UGCS and xPRO v3 controller with the OX and have limit switches/homing setup. I would like to use G54-G59 functions but...