Separate names with a comma.
Some features disabled for guests. Register Today.
Why the Y weight is not critical as the X axis? In my design I planned all the same movements and speed for X and Y axis.. Anyway I planned to...
Hello Keith, talking about the plate size and thickness versus weight (320x220mm plate, 6062 alluminium, specific wieght 2,7g/cm3): 320x220x3mm =...
So you configure 1/16 microstepping for X and Y, but the question is: between 10micron and 12.5micron something would be visible in a printed...
A question about X and Y microstepping, what configuration should I use with a 20T pulley?
Yes, after read the previous post of Keith I think I'll use a 8mm pitch lead screw with 40T/20T pulleys to have 0.02mm/step on Z axis without...
So, after some calculations based on "Prusa calculator" webpage: - with a config of "1 Full Step" , 20T - 20T, Pitch 8mm -> I can have...
That's true, my lead screw is T8x2 start 4 also, so each entire revolution moves the nut of 8mm. With my actual configuration is 1:1 (20T - 20T)...
That's all clear now, so on MKS Gen I need to set a "1 Full Step" for the Z motor using the jumpers under driver! Now in Italy it late night.. go...
Thanks for your advice, I'm consider to modify my printer as yours. I've another question: I see the gear ratio for Z screw (16:20) 20 teeth...
Good printer... I like it! A question for Keith Davis: if I want to change the heated bed with an MK2 314x214mm alluminium type (and place it in...