Separate names with a comma.
Some features disabled for guests. Register Today.
Hello we use a lot of ACM (aluminium composite 3mm) in our business for signs, but lately we have been getting a lot of rough edges when we are...
Hi Guys its ok i upgraded the UGS to the platform vesrsion changed the baud rate and everythings fine now (i hope)
Hello everyone not been here for a while because everthing has been working fine and dandy with my oosnest 1.5m cnc. came in yesterday with a new...
Just the wide wood cutting bits that you can get for a normal router, i think the widest was 12mm, it did take a couple of mm off the bed, but i...
Hello I have an Ooznest, 1.5m x 1.5m bed and its a brilliant machine which I use in my business for cutting all sorts of stuff, but we need to get...
Thanks David, Yep we figured that out now, trouble is there's a lot of crap leads about, we bought a good metal shielded one for £15 from...
we are using 0.9 GRBL Controller adn up until this weekend its been bang on, working a treat, problem is one of the lads cut through the USB cable...
Crikey Wayne that's a monster! Well done for creating it, looks like your in the same game as me, I wouldn't mind going that big just wish i had...
hello everyone, i've not been here for a while, due to the fact that my little (1500mm x 1500mm) Oosnest CNC Router runs every other day and is...
thanks for that Jestah, it probably is something simple, admittedly we don't know vcarve that well at all, i could do with someone sitting here...
Ill have to check everything later today, everything we do are regards printing and vinyl cutting is exported to .eps from coreldraw our main...
One other thing Ryan if you could help with this, I think I may need to calibrate the sizing or something, we cut some letters out at 600mm and...
thanks for the reply Ryan, yes maybe that's the problem, although we have changed to a chinese aircooled spindle now which is quite heavy although...
Good nice to hear your busy Ryan, we will be pushing it quite a bit with acrylics and composites, and we are using vcarve which is brilliant...
Hello Ryan, just thought i would send you an update, we were very busy through November and December so didn't get much done with the CNC Machine,...
Hi Ryan thanks for the reply, sorry fella you heard me wrong the spindle control is fine that's done independently, No its the speed of the...
Hello Ryan and team, i would just like to say i have added an 800w aircooled spindle due to not being able to get different collets cheap enough,...
well tried a different USB lead and left it out of the trunking, and its working fine now, no more crashing, we also had a usb to usb extender...
Thats what we were thinking as we have routed the cabling in with the usb will test more tomorrow. Thanks Alan
we soldered the jumpers across on the back for fast decay, the motor make a wierd noise after this was done but was advised by Ryan that all was...
