Separate names with a comma.
Some features disabled for guests. Register Today.
Cool, I'll be using it too!
I have a VFD on a Teensy 4.1 too. I had the same problem, of the spindle not starting. I had saw a video on YouTube and the guy there had the VFD...
I have to admit, Darwin, that that is the most unconventional spoil board setup I have ever seen! :):)
The web page is down and Keith has not been active here in almost 3 month.
Darwin, I don't know what you plan to cut on your machine but I suspect that you will not be happy with the T-slot setup you ended up with. If you...
That, I think, will require a special version of GRBL that I don't think exist.
CONTROL is on you MAC! Having a WiFi module on the Arduino will not help getting the file to CONTROL You have to get the file to your MAC.
Nice! Looks very sturdy!
As Giarc said, you'll need 4 blocks, 2 on each rail. A 12mm rail will most likely be enough for a Z axis. The length of the rail depends on how...
Another option would be to use SketchUp (the 2017 version) and the Ruby file SketchUcam which generates the g-code file. I use it exclusively for...
I have no idea what your schematic looks like or what values are the component you use are but I know that I have capacitors on the limit switches...
It may not appear to you that it's true but you'll achieve much better results if you put the printer on a solid surface and not on two surfaces...
Did you try to contact OpenBuilds store and ask them? I'm sure they'll accommodate you.
I use linear rails AND ballscrews. Nothing wrong with the ballscrews. It's the wheel that some people object too.
I think David meant the .nc file and the gcode file and not three version of the same nc file.
If you are in North America, where we have a 110v/220v system you can do it. Connect the supply wires just like you would if it were 110v. Just...
It would be good to know what material you are planning to mill in since wood may require different settings than aluminum.
The problem he's having is not the 'keep tool down' it's the M3 and M5 command that shut the router off while going up and down between letter,...
It's a NO proximity switch.
As you've mentioned in the past, there are two kinds of E-Stop. One that shuts down everything, preventing just what you've said above, and one...