Separate names with a comma.
Some features disabled for guests. Register Today.
Just revisting speeds and feeds...Making sure I am understanding... I cut pine and MDF...I use a Makita router at 30000 rpm and carbide two flute...
The "twisting" of the two beams is the very reason I am rebuilding/strengthening my Ox...I am replacing the the two 20x80's with a C beam. I was...
The first things on my mod list are to make the X axis stronger (less flex) and to gain more clearance between the router and the table...raising...
Been using my 1000mm x 750mm Ox for several months now...recent upgrades include a Gecko 540 controller, Mach3, and a nice electronics box......
I got mine from Amazon...really happy with it... 15mm x 30mm Black Plastic Semi Closed Drag Chain Cable Carrier 1M
I have been using the Gecko 540 for a few weeks (swapped out the TinyG). Finally got my control box and wired it up tonight...the box is from...
I need M3 for some 15mm linear rail! That is the size of the mounting screws. Thanks Rick Danym I could use about 40 if you have that many let...
Anyone know where I can get some M3 t slot nut plates for v-rail? SWD3D used to sell them but they are out and not getting any more... An internet...
Nice thread...lots of great info...I have been using my Ox clone (1000x750mm) for a few months and am going thru the plans to...
The issue is two solid state devices...see the link below... TinyG struggling with spindle relay | OpenBuilds
I have run a max of more than an hour, did not measure the temps but did not feel hot, no issues...
Quite certain you will find that your set screws on your pulleys are loose enough to let the pulley slip back and forth on the shaft...from teh...
Been using my Ox clone for a few months...two issues with mine I am going to address... Flex...It appears that fore/aft flex on the Z axis is the...
Interesting that you have no struggles...yes I have the latest firmware and I posted the same pics and issues on the TinyG forum...As long as I do...
Couldn't have done it without you Scott! Thanks!
Scott fixed me up with a sketch! I used the "high voltage" option because I found a 120v mechanical relay locally...wired it up and it works...
Thanks Scott...first I will make sure the SSR (from the TinyG signal) will light a light without visible flickering.. I just drew out the wiring...
Thanks Scott! Even though I don't know much about electronics, I was able to follow your great explanation! I will look for a mechanical relay (I...
Not sure what you mean by "stacking" them? The router is a variable speed model...does that mean I will shorten its life using a SSR? Are there...
Some of you may know the struggles I have been thru the past few months...I have an Ox type router with TinyG as the controller...any file with...