Separate names with a comma.
Some features disabled for guests. Register Today.
I had a similar problem with the units measurement. Have always used metric so didn't notice when the program opened and had switched itself to...
No I hadn't. thanks for the reminder.
My machine stopped in the middle of executing a program. Error message I get: PORT ERROR: Writing to COM port(GetOverLappingResult): Unknown error...
Thank You
Trying to setup a command button to check the Z axis is moving the prescribed amount. Here's the code; G91G21 G0Z10.0; G0X50.0Y50.0; G1Z-5.0F300;...
Thanks everyone.
Are there grbl compatible boards other than the UNO with more flash memory?? Apparently grbl uses 92% of the UNO's memory and triggers a warning...
Thanks.
Hate to ask such a basic question, but; My CNC is grbl controlled installed on an UNO. When I download a Gcode file from Vectric to my Open Builds...
Thanks for responding. When cutting acrylic we ran an Amana 51411K "O" flute at 450mm/m and 12K RPM and it does a good job. We tried Amana's...
So it turned out to be the acceleration rate was too high. Cut it in half and everyone's happy.
Setting up to use an AMANA V bit to engrave acrylic. Amana recommends 18K RPM and 90"IPM (or 2286mm/m) for this bit. Depth of cut is .2mm. Lead...
Planning to build a larger (24" x 24") machine and would like to upgrade to ball screws. Problem is, any I see on Amazon at a price I would pay,...
Peter: Thanks for responding and be assured we share your concerns. As a small cabinet and millwork shop we deal with toxic dust every day,...
We are putting 2 layers of carbon fiber on each side of a piece of .75" Baltic Birch plywood and then cutting out some pieces. Any one have a...
Thanks. Don't know how I missed it but Vectric has a "fill" feature that works with the diamond drag tips to fill in text, Really makes it pop.
Have been using a diamond drag bit to etch cast Acrylic for base lit projects and would like to go even deeper so the engraving shows up even...
Thanks, the spindle was extended to be checked by the indicator.
So a good news, bad news, afternoon. Per the photo's, the spindle support itself is perpendicular to the table. Good part. Bad part, the spindle...