Separate names with a comma.
Some features disabled for guests. Register Today.
Darned EMI. Spark Concepts replied to my Github issue and it turns out that it's EMI on the 0-10V signal line. The quick addition of a 22uF...
@David the swarfer I worked out getting the post processor to generate the gcode. In relation to the spindle speed issue. Below are my...
Thanks for the response @David the swarfer . Looking at the G-Code, that was my gut feeling too. It's odd, as the RPM's fluctuate depending on...
This is all fixed. All cause by EMI
Hi All, The kernel panic was due to EMI. Compiling new firmware with the suggested firmware from SparkConcepts is working a treat. Y2 Limit...
Hi Brains trust, Working with my new CNC router and doing some testing with aluminium. I am trying to cut some brackets out of 5083 aluminium to...
Hi Brains trust, A bit of a Noob to CNC routers & GRBL controllers. I have a Lead CNC build with an xPro V5 controller & CNC.js. I have an XYZ...
Hi @Allistar, As directed by SparkConcepts via their GitHub Issues page, I needed to re-compile the firmware. Only trouble is, after a re-compile...
Hi All, Spark Concepts came back to me via their GitHub issues page and gave me the fix. You can enable Y2 by making a couple of tweaks to the...
This custom build includes custom workbench / table with integrated drawer system and control cupboard Lead 1010 modified to 1510 with C-Beam...
Paul Mitchener published a new build: Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring....
In my quest to setup auto squaring on my Lead machine, the makers of xPro suggested that I re-compile the firmware enabling the A axis limit...
@that-jim thanks for the response. I think I have found the answer on grbl_esp32 wiki. It seems you need to connect both limit switches to the Y...
Thanks for your help. Separate cycles for each axis $Homing/Cycle0=Z $Homing/Cycle1=X $Homing/Cycle2=Y and $Homing/Squared=Y This fixed the...
Hi All, I'm a Noob here. Just fired up my Lead 1510 machine and I am tweaking my homing positions etc. I am using the latest version of CNC.JS...