Separate names with a comma.
Some features disabled for guests. Register Today.
Yeah their whole attitude seems to be "Look people pay us a lot of money for this software so it must be doing it right" and then completely...
Around a GT2-20T pulley it looks to be just about right with regards to the radius. That's a diameter 12mm - 2x0.75mm tooth engagement, so it is...
It is possible. I have no way of determining exactly what the problem is, but swapping back to regular GT2 belts made it go away. If I run the...
I bought some of those grey polyurethane belts with the steel strands in them too, thinking they would be less prone to stretching when rounding...
Yeah, but then it wouldn't fit in the space between the SSR and the power supply any more. As it is right now there's just a couple millimeters of...
Oh that looks great, I didn't realize they made them in snap in. I would have preferred to have a mount like yours if only I had made my printer...
I couldn't find any enclosed power plug mount for the "standard" Switched Fused Power Socket that bolted to the v-slot in the orientation I...
I built the first iteration square (with the bubble wrap) and posted about it somewhere in here. Due to the height required to accommodate the...
I like to do my own **** thing so I use hall effect sensors for my endstops. The advantage they have is that they are a "soft" endstop, which is...
Oh #1 change the first line to #include <fillet.scad> (without the ../). It is looking for the include file up one directory, which is where I...
They come out flat now with a 105C build plate on hardware store glass, unless the bed isn't level and one of the corners doesn't make good...
It would be great to just print a bottom on the bearing mount so flanged bearings wouldn't be needed. However, that would be a pretty large...
Here you go, they're mostly just simple sockets, pretty ugly really. The sockets are designed for 3/8" dowels but you can edit the OpenSCAD file...
Yes it should be enough. I can't find a post where I talk about it fully, all I can find is this post and these pictures. There are just modified...
Haha yes that was me! [IMG] The bubble wrap was just temporary covering over the dowel structure. I thought I'd give it a try because, hey, a lot...
I have 20 teeth on the stepper and 40 on each of the leadscrews. That works out to 800 (micro)steps/mm or 0.02mm per every full step which makes...
Did I miss where you posted what size your motor is? Mind posting the specs again? I use a 40mm NEMA 17 (300g) for Carl's direct drive extruder at...
Oh no, Smoothieware is the thing that is generating the incorrect PWM period. When set to 1Hz it actually outputs 0.25Hz or perhaps 0.20Hz just by...
I'm not sure what you're saying here about it being out of spec. Sure there is a possibility of the PWM on or off time being shorter than SSR...
Hey for those of you who, like me, bought a Keenovo silicone heater thinking they were ideal, keep an eye out for smoke! I was firing up the...
