Separate names with a comma.
Some features disabled for guests. Register Today.
I don't see the instructions here on the page so I will type them out again. All DXF files use mm as units. The composite DXF file has the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] [ATTACH]
Details please. Specifically what kind of stone, what was the power setting on laser and the feed rate? Were there any coatings placed on the...
I built a 1510 table for my LEAD machine and wanted both an additional support beam for the table top and a pull out platform for my workshop...
It's a year in with your post now. Any thoughts on how it's holding up or changes you would make?
I'm thinking of a similar mod myself. I think there may be some corner cases where using a lead machine base would be advantageous. A lead 1515...
I've been using this shoe for a month now and have found the design stable. It requires a few parts to complete which are available at Amazon and...
Are 65 mm router mounts tapped in the right place to screw to the Z axis plate? I don't relish the idea of taking my Z axis off but that might be...
If I understand the link, that is only available for the 230V 50 Hz version of the trim router. Any 120V options?
I put these on clamps thingiverse which will hold 1/2" plywood down atop the MDF wasteboard on the Lead Machine. They are more durable than I...
I'm looking for the DeWALT DWP611 trim router which I fits the 71mm router mount on the Lead machine Z axis. I can't find it locally or online....
This is what I came up with for leveling my spoil board without changing the rail spacing. I cut my MDF to just overlap the 20x40 extrusions....
I'm having trouble with the flexible couplings letting loose of the lead screws on my C extrusion lead machine Y axis. Here is the coupling for...
Justin, I agree with you that a single MDF is a simple and workable solution. The reason I departed from this tried and true method was because...
The way my 20x40 V slots extrusions are spaced from my C rails, there is about 3 cm I can't level with a my router. I can level the front but...
If I follow what you are saying, you oriented the spoil boards 90 degrees to the V-slot 20x80 and are picking up two more 20x80 to support the...
First of all I want to thank people for helping me figure out how to fix my inconsistencies in cutting depth. Here is some more data and a...
I welded my table of 1 1/4" steel tube covered with 3/4 plywood. If the table is not perfectly flat is the C beam and 2x4cm extruded AL enough to...
I'm having the same problem. I have a LEAD 1515 (60x60") and the middle of my spoiler is nearly 2mm lower than the edges. The table upon which...
The low memory warnings are definitely annoying. But the repo is well tested and mature. Personally, I'm trusting the developers that they know...