Separate names with a comma.
Some features disabled for guests. Register Today.
Do you mean the grbl $ settings? I have everything set to 200 [ATTACH]
I use blackbox from openbuilds I do the G-code with the easel ptogram And for control I use the interface from openbuilds Mainly I cut 6mm in mdf...
Sorry it's already in english
Foto
Hello, what's your accuracy in your cnc. In the first picture it is not much 6mm and in the second 20mm. The screws are tight, everything is...
Hello I have a question if it should be after inserting the 6 pin jumper, because this jumper is in the way?
But I have a connector right next to the cnc where all shielded wires are connected and can I also connect the dust hose ground here?
Hi all I wish you a Merry Christmas I have a question Can I connect the dust hose to the same connector if I have grounded shield wires? I have a...
Thanks, I know everything. Thanks for the valuable tips
Thank you very much for the clarification It's all clear already greetings
I just got a black box I have nema 23 2.8A model 23HS5628 motors Is the black box correctly positioned on the potentiometers?
many thanks for the replies I have x-carve based cnc with 6mm stripes so this speed will probably be too fast
OK, got it, thank you And does this sculpture last that long, is it normal? 900/450mm plywood 3mm thick? How long does normal take? Do other...
[ATTACH] [ATTACH] [ATTACH] Hello i use easel as cam and it imports gcod into openbuilds in easel, this project takes almost 2 hours and imported...
Jakiego zasilacza użyć dla czarnej skrzynki, ile watów, ile amperów? Czy ten będzie dobry?
Blackbox vis m542 actuator? What to choose and why ??
Hello Which driver to choose I built cnc, nema 23, 100cm / 100cm, on straps in the future maybe update to screws And the question is which black...
Do the controller circuits provide partial current after stopping to lock motors? but what is the current lock setting? For example with your own...