Separate names with a comma.
Some features disabled for guests. Register Today.
HI there I have 2 new in box original cubes I have attempted to use them and it is just too much trouble. I plan on converting to ramps boards...
Thanks David I will just continue to add simple things to make the PP1 work as well as it can. I think the roller on the bottom of the gantury...
Thanks for the input The real problem with the PP1 is the bearing rods used to slide the gantury on the X axis is they sag in the middle and do...
I am having an issue with the CenterLine Tool and the Pocket a Face tool. How do I set the bepth of the cut in each? I am using them in the...
So I got this Origonal PhlatPrinter, PP1 and it needs to be used and I just happen to need to use it. Nothing is really true and it is...
I am almost finished with this build and I have just posted the STL files for the Sice by Side motor mount and the Inline motor mounts. Make sure...
I have changed the Dremel mounts. I found that if I need to remove the Dremel of work on the carriage it was too much trouble. I would need to...
Hay Gary are you using the PP1 or PP3 with the black box now. They should be baisicly the same setup. I actually use the PP1 setup exactly like a...
Yes that is correct sorry I corrected the post Thanks David Mark
Hi All I did some dry cuts today and this thing is fast now!!!!! I added the X limitg switch one because I ran out and ordered some more. My...
I just posted new pics of the X and Y dual Stepper setup. It is working great. I have a bit os cleaning up wires and adding the X limit switches...
Well the Y came in even better. MM per MIN Old New 1000 2000 Acceleration 60 100 This thing ROCKS. I...
Well I have started to change the setup on the BlackBox to speedup the motors. The X was first. The old X settings were X...
Sio as I was wiring the Stepper motors I needed to disconett the X threaded rod and decided to add a Tenisioning plate t the end mount to stop...
Peter Reviving the Origonal PhlatPrinter with BlackBox check out the pics in my build it shows what I have done. Thanks Again Mark
Thanks Peter I will get that wired and give it a try. I do not spin the motors as I do know they are generators. I just found it strange that they...
I posted this in the BllackBox thread I am trying to sort out the correct wiring for the dual stepper motors on my PhlatPrinter 1. it had been...
Just Posted the final assembly pics of the spindle and carriage assembly. Added all the wiring with terminal blocks and installed the E Stops at...
I just posted 2D image of the Dremel Spindle Mount upgrade. installed pictures to follow. The mounting holes get a 3/8x24 tap and the bolts...
Nice one for sure I just wanted to be able to turn up the speed and since I had several other steppers doing nothing I decided to double the...
