Separate names with a comma.
Some features disabled for guests. Register Today.
Figured it out It's a damaged molex on the end of a AUX cord from Interface to Black Box. I must of messed it up at some point screwing around....
Started having problems yesterday. Running a facing operation to flatten some wood and it keeps stopping randomly. I can run the machine with the...
I had the same problem here and what fixed it was Tramming and using spiral down cut bits. The step over for that would be something like 0.05"...
So I think I got it sorted. It's looking like the MDF spoil board is bowed. And when set up to Face to remove 0 stock it's so slopped on the right...
Yes. Edit. Checked Black Box GBRL settings and nothing has change. So it isn't that.
I set the XYZ Touch Probe Plus at the left front corner of the spoil board a do a xyz probe with a 1/4 end mill. Then put in the spindle a...
So I went to Face a new spoil board and set it to 1mm or 1/32in and it removed 0.115in or about 3mm I even ran it with 0 stock to remove and it...
When I post process to create the g code the last 3 code blocks are not the same as the first 6.
Already did look up test v9 f3d
I looked at the video and the center 3 were done following the settings. Half the feed rate with a full circle at the end. The last 3 were not....
yes
The problem with that is is that it doesn't slow down sometimes it will go full feed rate randomly. I have a video showing what it is doing. It...
Fusion 360 for CAD and Cam. Using Bore which does a spiraling helical cut and stays in contact with the selected hole surface, For example I would...
So I went over that machine and I can't find anything wrong with it. Good news is the holes look really good but they are always a bit...
on the left is a circle on the right is what my machine (lead 1010) is doing.
Ok but does the direction of the egging indicated the problem is in or with the right side y axis assembly?
Hi. My lead 1010 used to make perfect holes. Now all im getting is oval or egged out holes. Something has obviously loosened up or moved and Im in...
That worked. It's only off now by 1mm Thanks man you are super helpful. I remember now, you explained this to me like a year ago but I forgot....
So 200*(711.2mm / 717.55mm ) = 198.23 ?
Hi. Hoping you guys can help me. What is the calculated steps/mm for a 1040mm ACME lead Screw? And just to let you know I don't have a computer...
