Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks David, I will. Phil has already brought it to my attention and it definitely looks promising.
That's my point, exactly. Changes made to the configuration are supposed to be trivial - unless the software is poorly structured or the...
Thanks guys for your time and effort, much appreciated!
I've already reduced my changeset to cpu_map.h and config.h before I started debugging. The Z axis consists of a pair of feed rollers that move...
This is a production machine running a custom firmware I wrote years ago. The client requested more sophisticated CNC control so I decided to use...
If I cover the sensor before issuing G38.2, grbl bails out with alarm 4 (as expected). Alarm 5 should only be raised when the movement to the...
Hi there, the result is: ?<Idle|WPos:0.000,0.000,0.000|FS:0,0> G91 G38.2 Z-25 F60 ALARM:5 [PRB:0.000,0.000,0.000:0] ok...
Thanks for your input. The machine works in metric units, and indeed at 10 mm/min the movement is a bit choppy, but G1 has no trouble moving the...
Hi, specifying the X and Y coords is indeed a bit superfluous, but there should be and there is no difference at all between the results:...
Hey folks, I've been scratching my head for a couple of hours over a probing problem. I'd appreciate any input. I have grbl 1.1f running on a...