Separate names with a comma.
Some features disabled for guests. Register Today.
So I am using the latest version of Fusion 360 and wanted to know if I should use Open Builds post processor or the one provided with Fusioh 360
No, not even close
Yes
Thanks for the idea. It looks like I still have ~1/4” before the limit switch comes into play. I did manually type in the commands and broke up...
I manually entered the commands and bypassed the router/spindle on command and still have the same error. The router is positioned in the middle...
I am using Fusion 360 with the OpenbuildsFusion360PostGrbl post process. I keep getting an Alarm Error at the following location: G90 G94 G17 G20...
Thanks Shawn, That did the trick
I want to just route around the perimeter of a DXF image. I am using Fusion 360 and when I try to do a 2D contour around the image the bit does...
Thanks, I thought normally on meant it was on when the switch was turned on. Thanks again for your help. Joel
At first I didn’t understand what the IoT relay had to do with anything.I thought it was nothing but a power strip with a few relay controlled...
Not sure what your asking
Checked again today and there are no red exclamation lights coming on at any time
Yes, jogging works as you stated. I also use the XYZ touch probe and it works correctly in determining position
Hello Alex, Yes I did. The only movement after starting the program is the router going straight down. No X or Y movement. With the Hello World...
I recently built up a Workbee 750x1000mm and installed the openbuilds blackbox controller. I have attempted to cut the Openbuild HelloWorld CNC...