Separate names with a comma.
Some features disabled for guests. Register Today.
Peter - Good news I have now run the machine for over 5 hours and they have been hard hours and not one alarm or any issue. Not sure what I really...
Peter - Replaced the wire to the Z and X switches but left the old ones in place to test. It ran much better. Almost an hour before I got an...
What if it was a switch wire that is making an intermittent connection. Will take me about twenty minutes to rewire switches. I am not going to...
Peter - I downloaded the new 1.47 firmware and restarted my wasteboard flattening job. This way every inch and position is covered. It ran about...
Peter - What would happen if one of the home switches opened up or was triggered while running?. I had cable failure with the steppers and...
For the last week, everything has been working great. No issues with the USB drive, All the buttons work and I ran the machine for hours and it...
Did not know that but very nice to see. The abort button was major for I lost two bits and it scared the hell out of me when it just paused and...
Turn on my interface to see we have a new firmware update to 1.45 . It took two tries but the interface downloaded and installed the new firmware....
Realized I was ordering the wrong cables. After reading the requirements I finally ordered two cables. The model is CF880-05-04, 20 gauge (they do...
Great information. Very much appreciate your help. I just tried to order the cables. They have to call me back tomorrow with a quote. They do...
Peter- I have had three failures with three different cables. To make sure it was the cable and not the connector I removed the connector and...
After having all four wires fail with my first Z cable I used speaker wire. I had to spot tie it to the outside of the track but it still made all...
I had the same problem but eventually all four wires failed. I just replaced the cable two days ago but today I had another Z failure and I am...
Peter, I just metered all 4 lines to the stepper and the blue wire is open but not at the plug but the wire itself is open. Now I have to go find...
I got my Leas 1010 bundle last week and built the unit over the weekend. I then went through all the calibrations and setup and all was well. I...