Separate names with a comma.
Some features disabled for guests. Register Today.
[ATTACH]
Here are my pics for the 6 pack controller. I jumped the negatives together on the driver. I couldn't find my original documentation.[ATTACH][ATTACH]
yes, there is a list of parts at the beginning but that list isn't exact, there are parts that you don't need on it. And I suggest using rack and...
George, If your just moving back and forth on the rail, your option 1 will be fine in my opinion. My machine moved around great with the belts, it...
GitHub - bdring/FluidNC: The next generation of motion control firmware GitHub - bdring/6-Pack_CNC_Controller The 6 pack is the board i use now...
I use an esp32 board with fluidnc now, it's a 32bit processor instead of 8 bit. When you turn it on the board connects to your wifi and has a host...
Great news! I'm glad you got it working well. Thanks for the update, I've been wondering...
Do you have the spacers between the nut block and the plate?
Maybe look into black box user forums for answers to the stopping problem. I'm pretty sure others have the same problem even with other controllers
I have the adjusting screw in top. I do not know if makes a difference what direction it is
It could be if the screw is in too far it could bend that top thread out if line.
I'm not home now but I'm pretty sure my z axis acceleraion is 500, my lead screw length is 290mm. I think that may be the problem.
I would checkfor something binding like wheels too tight or three backlash nut. Can you spin the lead screw with your fingers when the motors are...
Also make sure your microstepping isn't set too high. I use the 400 steps/rev. I tried higher settings and did loose steps at 1600 and above. I...
I almost mentioned the diode... I read to put a diode on and tried it but the power supplies wouldn't work so i took it out and works fine. 48...
Sorry I didn't respond to your last post, I was going to do some speed tests first but got busy with orders and haven had time. I did not do any...
I haven't had any lost steps with the r&p, I wish I had done that from the start... For nema23 8mm shaft: Martin TS2014 Spur Gear, 20° Pressure...
I bought 4 of the R2020x6 ft 20 pitch 1/2" for $216 shipped 6 months ago. I bought the gears on amazon. I used m3 screws and countersunk them. I...
I also switched to these steel wheels and I like them alot. They roll alot smoother than the plastic ones. [ATTACH]
