Separate names with a comma.
Some features disabled for guests. Register Today.
On an inside path it looks like an overcut at the end of the pass. Any thoughts on this? I'm using Auto Cad to generate the DXF.
Thank you. I will make the changes. Original drawing was 1 piece. When the cut was made and approved, I copied the part to cut 4 parts. I added...
found it!
Checking back to see if you were able to look at the file I sent. Since then, I have opened in CAM past drawings I have been able to create tool...
the file attached was created today.
Ok. I can send later today. Thank you.
On Monday and Tuesday I was able to generate tool paths and gcode. On Wednesday I could not. Says tool paths and gcode were generated but no tool...
I guess I was looking to stop the machine without running to the software to stop it. The VFD instructions were not to have any switching between...
While I was waiting on the new controller to arrive I had gone thru every connection on the machine. I removed the Open Builds connector and...
Yes I am using the Meanwell power supply.
I was not able to correct.
Correct. I had nothing else connected which is why I didn’t know why the tool LED was on.
Yes. This morning I had the usb to the controller without power to the controller. Motors light goes on so I know my USB should be good. But I...
Ok. Motors are from stepper online. The other items you sent I will have to check end of day I’m central time. The only wire issue I had was with...
Wiring was all checked. System rebooted. Same results. The port does open to check for firmware but cannot find any and then closes. Do I need a...
FYI I disconnected all but the power supply and USB to the Black Box. Is that a printer cable to the Black Box? I can buy a longer cable. I’m...
Thanks for your input. I was just able to get back to this now. Yesterday I started everything up. Laptop first which opened up with a windows...